I got a insignia tv i want it to work withe the dish pro satellite remote control i need the device code to program it

Program Your Cable or Satellite Remote Control to Work with Your TCL Roku TV
Providers Codes for TCL Roku TVs Programming Instructions Comcast Cable (Xfinity) 11756, 12434, 12290, 12292 Comcast Cox Communications 1756, 11756, 12434 Cox DISH Satellite TV 1756, 535, 645 DISH Network Frontier Communications 688 Frontier Communications https://support.tclusa.com/tv-remote-codes/roku-tv-remote-codes

03732,03770. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

craneserv710,
I would need more information on if it has intermittent control of TV or satellite to provide the best information. I have listed some steps to try below for either situation!
Satellite:
If the remote has intermittent use on the satellite, ensure there is nothing that may be causing interference. For a TV1, this could be a fluorescent light, or a direct heat source blocking the IR signal. If it is a TV2, interference may be caused by a device that is powered on. You can try turning off equipment to see if interference is removed, or you can try moving the antenna on the back of the receiver. If it is sticking straight up, turn it parallel with the receiver. If it is laying flat, put it straight up.
Television:
If the intermittent control is for the TV functions, you may need to program a new code into the remote. There are multiple codes for a remote and some will work completely, while others only provide intermittent functions.
Let me know if you have any other questions, or if you can provide additional details! I'll be happy to assist you.
Tommy Faust
DISH Social Media Representative

Here are the remote codes to program your DISH remote to your Insignia TV: 720, 908, 726, or 503.

I have also provided the instructions on how to program our remote to your TV:
AddressRemote to TV

1. While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
2. Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up

1. Press the Pound (#) button - The mode button you are programming should flash three times
2. Press the large, red POWER button - The device should turn off

Thanks.

Depending on the age of the dish paperwork you might be able to get some newer codes from dishes website. There is a slim chance that you might find some codes from Insignia for the dish remote; and some times you can reverse it and program your tv remote for the dish box. Other than that they should have a step by step on how to find a code that will work with your tv. Usually its something like have the tv powered up and then on the remote press and hold a couple of buttons until you get a light code on the remote (flashing or solid) then. Something like press tv then power, wait, tv then power, wait, etc. And eventually the tv will turn off. Its laborious but that will usually, eventually, work.
Good luck.

It would be our please to help you with that. Here is a list of remote codes for addressing the DISH remote to an Insignia TV: 720, 000, 697, 834, 544, 538, 638. Press and hold the TV button until all mode button back lights come on, then release. Use the number buttons to enter the Insignia codes. Press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. Also remember to put the remote back in satellite mode. Thank you for being a valued DISH Network customer!

Phillip Chang
DISH Network Customer Support Representative

What you can try:
- Check the DirecTV code set for the following brands:
Funai, Symphonic, Sylvania, Aventura, Durabrand, ESA, Magnavox, INSIGNIA, and Misakai

Your set and the above-named are all built by Funai.

Even if you find one that works, it probably will not give you full functionality as would the original TV remote, which you can probably find at http:\\www.remotes.com

Before you buy any 'universal' remote, please don't expect it to absolutely work with your set; there is no such thing as a 'universal' remote.
If you find one that interests you, take the time to look up the mfr.'s website and check the code lists for your set.