Husband put new belt in a few weeks back...Now realized today there is water coming out the bottom somewhere. Jeez last week main drain to house was clogged and the washer back washed into my toilet and flooded my basement! I thought I was all done with the water issues!!
Need help please! ASAP
SOURCE: how do i turn the water back on in my house (main water valve)
Look behind that washer and find them water supply hose, follow them back to where they attach in the wall and turn their faucets on IF you know for sure them hoses is tight enough or get his **** back there to do it.
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
SOURCE: AMANA WASHER WON'T SPIN. HOW DO I REPLACE THE BELT?
is this a whirlpool built amana? if so, its most likely a direct drive model, and when it doesn`t spin its likely a coupling between the gearcase and motor assembly...youtube has videos on how its replaced, which isn`t too complicated to do...good luck
SOURCE: Forgot to remove shippping bolts before using machine.
I would take out the shipping bolts and then run a prgram such as Spin.with no clothes in
If that sounds ok, wet a few towels and spin them dry
If that works put a full load in and go for it
Unless your machine was way out of balance you should not really have damaged anything.
The transit bolts are there to stop the drum from banging around during transit and unless they have torn free or have bent you should be ok
163 views
Usually answered in minutes!
×