Canon jP 1500 is printing blank pages It was working fine. Suddenly (new page) dispenses only blank pages.It has plenty ink, sounds like it is printing but dispenses only blank paper
Re: Canon jP 1500 is printing blank pages It was working...
Try a deep clean, sounds like a blockage but odd all at once. it could be possible that cartriges are a faulty batch, ive experienced many times but not all at once. hope this helped jay.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Some times when you get a new cart. a fine film can be blocking the exit hole,check that this is clear by shaking the cart. up and down over a large piece of paper ,if you do not get any ink out ,take a small pin and gently insert it into the exit hole and move it around in a circle, don't go to deep,then try shaking it again..? Another idea is to replace all the carts.(colour ones also) as some printers wont work unless you do this, after changing carts. disconect your printer from mains supply and leave for about 15 minuets to reset..Hope this works for you good luck. T.C.
how about colored pages? this normally means that the head is already busted. Unfortunately you will need to take this to cannon to get the heads fixed.
the m/c needs the 5 tank for faxes!Is it a canon cart?The head might be blocked!Go to your printer properties and under maintanace do a deep clean!!Good luck!!
Remove the printer from control panel, under installed printers, then unplug the usb cable and reinstall the printer drivers using printer cd, or download from canon support website.
Some third party cartridges will not work with your printer as they are remanufactured from used cartridges.
It is more expensive to buy genuine Lexmark ink, but atleast you know it will work.
You may try reinstalling the driver before buying new ink.
I hope this helps.
Good Luck.
I am working on the same problem. While you will not like the
answer here it is for the canon mf6530. What is causing it
is the shutter over the laser is failing to open. There for
it blocks all exposer. A temperary fix is to carefully lift the
shutter and tape it open using black electrical tape. Then
try a few prints you should have an image if this is your
issue as it is mine. I do not recommending running it in
this condition very long. When I find the final answer I
will attempt to post it.
×