Question about Hotpoint Aquarius WF220 Front Load Washer

1 Answer

Hotpoint aquarius banging about when spinning

Hotpoint aquarius front loader banging about when spinning

Posted by lornajean38 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi take the top of the machine and check the brick at top or bottom of the machine they sometimes come lose .

Posted on Sep 30, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hotpoint wf740 aquarius 1400 v noisy banging during spin = dust


It could be a broken drum restraint spring, or a worn or broken. or loose shock absorber.
To check the springs, remove the top cover, and you will see the springs.
Another possibility is the concrete weight could be broken or loose.
You need to remove the lower rear panel of washer to check the shockers and concrete weight.
Please rate my solution.
Thankyou.

Jan 31, 2010 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

My hotpoint aquarius front loader has power but wont work.


Most likely the Door interlock is faulty or has fallen apart (through the banging of the door)

Aug 21, 2009 | Washing Machines

1 Answer

Drum is loose and banging on hotpoint aquarius wf541


This sounds like a classic case of main drum bearing or drum support failure, it is a major repair and not really a DIY repair, unless you are coversant with w/m's
It involves a complete strip down and in some cases it is neccessery to to have to replace the drum as well.
The cost of the parts involved is well in excess of £100.00,and it really is not an economical repair.
I think you would be better off buying a new washer.
Plz rate my solution.
Thanks.

Jan 15, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hotpoint aquarius 1100 bangs while spinning


Several possible reasons for this. M/C not level, causing it to move about.
Overloading of m/c.
Loose concrete balance weight, there is one at top and one at bottom.
Suspension spring broken or unhooked.
Suspension leg loose or broken.
Main drum bearings worn, to check this, turn drum by hand and if it feels noisy or rough , then bearings have gone (expensive repair).
There are other possible causes, but these are the main reasons.
Plz rate my solution.
Thanks.

Dec 29, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Banging washing machine on spins


Hi. I don't know if your problem has been sorted yet, if it has not ,then it sounds to me llke the concrete balance weight is loose or broken

There are 2 of them, one in the top of the m/c, and one at the bottom, if either of them are loose, then that is your problem.

If loose, can be tightened up, if broken away from the drum then you have a major problem

Nov 16, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint Aquarius WMA46 1300 , front loader


half loads will vibrate more than full load
check transit bolts are removed
if vibration persists, then fault is probably shock absorbers worn

Sep 07, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint WD 440


FIRST OF ALL THE PERSON WHO INSTALLED THE MACHINE SHOULD HAVE REMOVED THE TRANSIT BOLTS YOU MAY BE LUCKY THAT ONE OF THE SHOCKS MAY HAVE COME OUT OR A SPRING MIGHT HAVE BROKEN

Jul 13, 2008 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WF220 Front Load Washer Logo

Related Topics:

1,301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers

gbob59

Level 3 Expert

3063 Answers

Cindy Wells

Level 3 Expert

6186 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...