Sony blue ray bdp_350 no picture or sound

Hello
This is the picture of Sony BDP-S300 BLU-RAY DISC PLAYER. The second one is its opened view. OK.

There are no compatibility issues. In your BluRays HDMI audio settings set the audio out to PCM instead of bit stream.The TV cannot decode digital bit stream audio.

tv repeating hdmi signal out of range did a bad choice 1080p instead of 1080i how fix the problem? thank you

• probably the problem is with the disc
• try 2 play it in another player
• if there is no problem with the disc ,check if the drive is dusty
• if so clean it using the cleaner disc

This is button config for master reset without picture:
Home Left button x 3 Down button x 7 ok (centre button) ok Down button x 6 ok Left button x 1 ok ok wait a couple of seconds for settings to complete, when you switch back on you should have a picture and be back at language set up screen.
Hope this helps.
Please note I am from the UK and I am assuming your menus are the same as mine

This is button config for master reset without picture:
Home Left button x 3 Down button x 7 ok (centre button) ok Down button x 6 ok Left button x 1 ok ok wait a couple of seconds for settings to complete, when you switch back on you should have a picture and be back at language set up screen.
Hope this helps.

I once had a similar problem, although with a different TV. It was insufficient to just power down the TV -- I had to unplug the TV so that it would re-initialize. It solved my issue.

try cleaning the lens as you would with you previously owen DVD player. Also make sure the disks are clean. If that doesn't work, try resetting the machine by pressing and holding BOTH the stop and power buttons for about 10-15 seconds.

i have new Sony BDP-S350 Blu-ray disc player. i want to connect it to E-net and some other devices, Camcoder, Pc, Laptop. i have got all HD ready cables,
I want to use the Universal Remote from my Sony Bravia LCD 42'' TV and Blu-Ray. can anyone help me?
thanks

omar