Can't change battery in optical mouse hub

Hi three, uninstall the Logitech V220 Cordless optical mouse driver from the laptop and then restart the laptop again. Now install that Logitech V220 Cordless optical mouse driver again . I am sure its will start working. If not then make sure your batter Is properly fixed inside in the mouse & that's fully charged. After those thing if still not working then visit service center, because the mouse censer stop working and its damaged.
Thanks & waiting for your feedback.

I checked with someone from the Tech Support Department in my company and suggested I press the connect buttons. I also changed the batteries in my wireless keyboard. I pressed the connect buttons on the receiver, mouse and keyboard. After all this the mouse started working again.

Most opticals do not track on smooth white surfaces. It needs textures or color. Try pressing the "CONNECT" button on the bottom of the mouse and on the remote sensor.

Hi there.
Underneath the mouse there should be a small button which is the connect button, press that and also the button on the docking station if there is one.
Also check to make sure the batteries are in the right way as its an easy mistake to make.


Good luck and thanks for choosing FixYa!!

Maybe your mouse in malfnctioning. It depends how it is use or the product itself. You must configure the mouse on control panel.

Check the bottom of the mouse for a connect button. Push the connect button and it should work.

change battery

Most cordless mouse I saw has a reset button. Press this button, make sure you're in the transmission distance from the receiver when you do this.

Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it to Reset/Connect the mouse to the receiver and work properly.
If not, try pressing the receiver button and then press the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

noob