Restarting my Citizen Promaster Eco Divers 200 Watch

When was the last time you left the watch out to charge? EcoDrive watches are basically daylight powered. It can also use light bulb light to charge as well. My first suggestion would be to place it face up somewhere where it will get plenty of sunshine and leave it to recharge. It might take 3 or 4 days if it has gone totally flat but it will cost you nothing to do this. If this doesn't work I would recommend taking it to a good Citizen dealer and see if the watch can be serviced. If you have pulled the crown too hard you could have damaged inside the watch.
A built in feature on some Citizen watches is the '2 second tick'. If the charge is low the second hand will jump 2 seconds at a time instead of one. When recharged it goes back to normal.

To determine the exact model and specifications of your Citizen Eco-Drive, flip the watch to the reverse. On the case back will be extensive information about your timepiece. You're looking for the "movement caliber," a four-character combination of letters and numbers, separated from the seven-digit "case number" by a hyphen.
Next step, visit this links:
- citizenwatches.com.au/instruction-manuals
- citizenwatch.com/COA/English/settings.asp

Hope this helps (remember to rate this answer).

1. Pull the crown out to position 2, two clicks.
2. Press and release the lower right button.
3. Rotate the crown to adjust the minute.
4. Press and release the lower right button.
5. Rotate the crown to adjust the hour.
6. Press and release the lower right button.
7. Rotate the crown to adjust the date.
8. Press and release the lower right button.
9. Rotate the crown to adjust the current month and leap year.
10. Push the crown to position 0.

Hi, This watch is Calibre C651, same as Model #JR3090-58M (Promaster Air Collection - Blue Angels Skyhawk). C651 is not available on Citizen website, but you can use Calibre C650 instructions. Download PDF manual and follow instructions on page 3. They are pretty detailed, so take your time, and you should be successful. If you don't have the manual, Try this link:
http://www.citizenwatches.com.au/instruction-manuals

Take the four-digit Calibre number (C651 or C650 in this case) from the back of the watch, enter it, and download a PDF of your watch setting-instructions/manual.
I hope this helps you. Thanks, Bill

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical
support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on
"get setting instructions"


or

Go to "citizen.com" and click on "watch finder".

Put your watch model into the search box on the left and click on
"search".
Click on the watch to view details.
On the right is a small menu, click on "get technical info"

On the right you you will see a list of instructions you can download

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical
support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on
"get setting instructions"


or

Go to "citizen.com" and click on "watch finder".

Put your watch model into the search box on the left and click on
"search".
Click on the watch to view details.
On the right is a small menu, click on "get technical info"

On the right you you will see a list of instructions you can download.

I have the same problem! My WR 200 is always setting the year to 2016, which then fouls up the date. I don't have a solution.

Contact the manufacture

I misplaced the manual for citizen BL5290-59E?

Go to this link and follow instructions for finding your particular watch movement and then lookup instructions.
http://www.citizenwatch.com/COA/English/settings.asp