Code 39 - Computers & Internet

Proposed solution: uninstall Google Chrome Frame
I discovered the pb yesterday, trying to connect to Facebook on my XP SP3 Win32 desktop that runs fine, but on which I rarely connect to Facebook, so that I don't know for how long the problem has been here (days, weeks, but no more)
I struggled in various forums to find hints others than "use Chrome or Firefox" etc...
I finally found the solution hidden in:
http://blog.crosbydrive.com/?p=310
After uninstalling Google Chrome Frame, I just had to quit IE and launch it again.
Many thanks to "Lexington Computer Repair Blog " and Sue W (who hold the solution from a Facebook forum)

Try other browser or install java if java is not installed..

- Try a different web browser - Restart your computer - There might be an issue with Facebook itself, so you might have to wait a couple hours - If none of those seem to be the problem, there is a good chance you have a virus.

looking like you have some trash that needs cleaning in your cache folder. Have your browsing history cleaned and do not keep passwords in your system, as they may be vulnerable to theft.

Lemme know if this helps, if not, I will look further into it.

For helpful tips on internet security, you may also visit the site below. It seems free for now on it's building stage. http://bit.ly/otZ0jN

If you forget the security code means get the master reset code for that one, master unlock code is a code that completely resets your phone, removing any security locks , get the code from this site Unlock-free.com , it has the best services for the master reset code for your Nokia 7210 model mobile.....I hope that it may helpful to you....

How to use the Unlock Code (This will be emailed along with your codes)

Sony Ericsson E15i Xperia X8



How to enter the Unlocking Code for a Sony Ericsson Model phone General Information about your Sony Ericsson unlock code
When you receive your email with your unique Sony Ericsson unlocking codes, you may see there's actually more than one code, as some models require more than one code to unlock them fully. However, for simplicity, we do aim to send you a single unlock code, which will be your network unlock code (known as the NCK).

(See below for more details about code formats and more - Please read all before you start unlocking?)



Option 1 - Sony Ericsson Models
1. Turn on the phone without SIM Card in it
2. Press the 'left arrow' or joystick left once
3. Press the * (Star) button twice
4. Press the 'left arrow' or joystick left once
5. The phone will display one of either messages saying 'Personalize with MNC2' or 'Personalize with MNC3'
6. Wait approximately 5 seconds.
7. The phone will display 'Network' and a picture of a closed padlock.
8. Press Select.
9. The phone will display 'Unlock (Net) 5' and 'NCK:'
10. You can now enter the Unlock Code provided.



Option 2 - Sony Ericsson Models
1. Turn on the phone without SIM Card in it
2. Press the 'left arrow' or joystick left once
3. Press the * (Star) button twice
4. Press the 'left arrow' or joystick left once
5. The phone will display the message 'Personalize with MNC2'
6. You can now enter the Unlock Code provided.



Note for options 1 & 2
- When doing the first 5 steps above you'll need to do it quite quickly. - If your phone has a joystick 'JOGDIAL' you must press the 'down arrow' instead of the 'left arrow' in steps 2 to 3 above. By 'Down Arrow' we mean move the joystick down

-------------------------------------------------------------
Quick Glossary
NCK = Network lock
SPCK = Service provider corporate lock
SPK = Service provider lock



Code formats you may receive for Sony Ericsson models:
Wherever possible we'll try and send you just a single unlocking code to unlock your Sony Ericsson.
However for certain models we may need to send you more than one code, even if you don't use them all.

It would be a sting of codes as per this example:

CCK: 0984118391686835 or 0984118391686835
ESCK: 0000000000000000 or 0000000000000000
NCK: 4176979876474847 or 4176979876474847
NSCK: 3908320398047435 or 3908320398047435
PCK: 2061751224321908 or 2061751224321908
SPCK: 9960493992337231 or 9960493992337231

Note: The NCK (Network unlocking code) is the main and usually the only one you'll need.



Please note:
- If you see the message 'NCK: (0)' or 'Not Allowed', this means the phone is hard-locked. The phone cannot be unlocked because there has been more than 5 wrong unlock attempts.
- If your Sony Ericsson has a Joystick, then you must press the DOWN Arrow instead of the LEFT Arrow. DOWN Arrow meaning Joystick downwards

Your Nokia phone was designed with a default security code of 12345.

To change it,
1. Go to 'settings' on your phone.
2. Then 'security'.
3. Then 'access codes'.
4. Then 'change security code'.
5. When you select to change security code,
it would prompt you to enter the security code (initial one, ie. 12345).
6.When you have entered the intial one, it would prompt for the new code.
7. Enter any 5- digtit new code of yours.
8. It would prompt for a confirmation.
9. Re enter the new code.

And your security code is changed. But remember to use number you can easily remember.

Hope that was helpful?
Regards.

Try this:

In Internet Explorer, go to Tools -> Internet options -> Advanced tab. Check "Disable script debugging," click "Apply," then OK. Then try it again.

Ben

For a guardtec 593

Programming User Codes
(Master code only)
system.
1) With the display showing ' Un ' enter a Master code
2) The display will show ' SE '
3) Press NO five times, the display will show ' Uc ' (flashing).
4) Press YES, the display will show ' U- '
5) Enter the User number you wish to program (1 to 7) followed by YES
6) The display will show ' Co ' Enter the required code (4, 5 or 6 digits) followed
by YES. (Entering 000000 will delete an existing code).
7) The display will show ' t- ' enter the code type from the following list
1 = Set Only 2 = Main User 3 = User 4 = Master followed
by YES. A full description of code types is given on page 3.
8) The display will show ' Uc ' (flashing)

If you wish to program other User codes return to step 4
Or
To return to the Unset condition press 0

this is for the led version.