Question about NorStar T7316E Corded Phone
An expert who has achieved level 3 by getting 1000 points
If you want to temporarily turn them off use do not disturb (feature 85, feature #85 to turn DND off)
Turning off the ringing permanently will require you to program the set. Programming
is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring press CHNG til it says appear only.
press next key (lower right arrow)
The display should say line 002: appear & ring
Repeat same procedure as line 001 til all available lines are done
press the release key when finished
Posted on Sep 24, 2009
SOURCE: Ringer
You may need to change your Ring Volume. Here are some instructions on how to do so.
To Change your Ring Type:
1. Press the Feature button, then * 6
2. Press the number keys 1 – 4 to hear the different ring types
3. Press the OK softkey when you hear your desired ring
To Change the Ring Volume:
1. Press the Feature button, then * 80
2. Press the volume key up or down
3. Press the release key1 to exit and save the volume level
Let me know if this works for you.
Posted on Oct 29, 2008
SOURCE: How do I turn ringer
Hi Have you set your DND (Do Not Disturb)?... on.
Try pressing Feature #85....
That should take of DND... or if you have 'Call Forward' set
Press Feature #4.
Hope this helps
Posted on Nov 05, 2010
SOURCE: nortel T7316E ringer
It always will. Now you need to go into system programming and program the phone to NOT ring.
Posted on May 21, 2010
SOURCE: How do you turn the ringer back on a T7316E Nortel
MANY TIME A PERSON DIALS WITHOUT REALIZING THAT THE ACCEPTANCE CODE NEEDS TO BE INSERTED FIRST THE Nortel T7316E?...If you want to
temporarily turn them off use do not disturb (feature 85, feature #85 to
turn Do Not Distrub off) Turning off the ringing permanently will require you to program the set. Programming is done on M7310,
...regards John
Posted on Mar 14, 2011
Testimonial: "Thank you for your quick response, and help! Its most appreciated. So, for my next question How do I program the M7310 :)"
MANY TIME A PERSON DIALS WITHOUT REALIZING THAT THE ACCEPTANCE CODE NEEDS TO BE INSERTED FIRST THE Nortel T7316E?...If you want to
temporarily turn them off use do not disturb (feature 85, feature #85 to
turn Do Not Distrub off) Turning off the ringing permanently will require you to program the set. Programming is done on M7310,
...regards John
30,655 views
Usually answered in minutes!
×