The default IP address for this router is 192.168.1.1
unless changed. If you want to be double sure then perform the steps below:
A. Click on Start—Programs—Accessories—Command Prompt.
B. In Command Prompt window, type in 'ipconfig' and hit 'Enter'. Note down the IP Address, Subnet mask & Default Gateway here.
Default gateway here is the IP address of your router
Hope this helps.
By default ip address is 192.168.1.1
or
192.168.0.1
But if your ip is different and if in your router DHCP is enabled then you have to check your computer ip address with which your router is connect.
Go to start menu then type in run "ipconfig /all"
then check gateway ip it is your router ip.
Also you can check your ip wtih phone reciver connect your phone receiver to router with phone line jack.
Then press * so you can listen configuration.
Let me kow if you need more assistanse.
Thanks.
k i think why its happend probabally there is a port blocking is there in the belkin router so try this set static ip address on the pc in the range of belkin>and login to belkin router and enable DMZ on the belkin router the dmz host ip should be the one which u assigned statically on the pc
889 views
Usually answered in minutes!
×