No disk My sister just recently gave me her lexmark x6170 all in 1 printer but doesn't have to disk that came with the printer to hook it up with my computer. Is there a site or something that i can go to that can help me set my printer up.

Lexmark is one of the most popular printer manufacturers, and the installation process is fairly straightforward no matter what computer brand you have. Lexmark, however, doesn't always include all of the equipment required to hook up the printer. If you want to hook up your Lexmark printer to your Gateway laptop, you will probably need to purchase a printer USB cable.

1.Plug your Lexmark printer into the power outlet.
2.Turn on your laptop, or make sure all software programs are closed if your computer is already on.
3.Insert your installation disk into your Gateway laptop's CD or DVD drive. Wait for the "Welcome" screen to appear. If it doesn't appear after a minute, launch the installation CD manually by going to your start menu and clicking on "Run." In the "Run" field, type: D:\setup.exe
4.Press the "Install" button on your "Welcome" screen to go on to the "Introduction" screen.
5.Press "Continue" on the "Introduction screen" and press "Continue" again on the "Read Me" screen. Agree to the license agreement and follow any additional installation prompts.
6.Connect the Lexmark printer to your Gateway laptop when prompted. Plug the USB cable to the back of the Lexmark printer in the "Quick Connect Laptop Port." Then plug the other end of the USB to your Gateway laptop.

I hope you find it very helpful. Thank you for using fixya.

You can download the printer software here: http://support.lexmark.com/index?page=recommendedDownloads&locale=en&productCode=LEXMARK_X2550&segment=DOWNLOAD&userlocale=en_en#1

go to the Lexmark web site - search your printer - get your driver

Try "http://www.support.lexmark.com"

or in North America, 1-800-LEXMARK (539-6275)

hello,

Ok try to hook and see if the system install it without a installation disk.

If this not resolve, then you have to find driver at lexmark websites.
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

may this help.

melnavz

You can just download the driver here.

http://drivers.softpedia.com/get/PRINTER/LEXMARK/LEXMARK-Printer-X5150-Version-1042.shtml

You can download the drivers from here:
http://search.lexmark.com/printer/US/en/18K5700
Usually with Lexmark the drivers come bundled with all the software that was on the CD.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

i need the software to install my printer. is there some where you can download it for free.

Go to this site and either click automatically detect printr or click on your X75 model and download driver. http://support.lexmark.com/cgi-perl/selections.cgi?ccs=229:1:0:0:0:0&target=http://downloads.lexmark.com/cgi-perl/downloads.cgi&&req=::::: Your printer should then work fine.