We have a xerox docucolor 700 and we keep getting an error/ fault code of 042-326. How can we fix this to make the copier run?

Fault Code 027-452: Duplicate IP Address Detected

Xerox https://www.support.xerox.com > en-us > article
Feb 6, 2019 - Fault Code 027-452 occurs when another device has been detected on the network using the same IP Address as the Xerox Device.

Fault Code 027-452: Duplicate IP Address Detected ...

Xerox https://www.support.xerox.com > en-us > article
Jan 19, 2021 - Resolve the Duplicate IP Address Conflict With Another Device on the Network. Manually Set a Static (Permanent) IP Address on the Embedded ...

How to Fix 027-452 Error Code for Xerox C7020 C7025 ...

XwkTech https://www.xwktech.com > blogs > articles > how-to-f...
Nov 5, 2019 - Perform the steps that follow: 1. Advise the customer to change the duplicated IP address of the PC. 2. If the fault persists, perform the 016A ...

Xerox Docucolor 700 error code 027-741

Copytechnet https://www.copytechnet.com > ... > Xerox
Aug 30, 2014 - This error code means your bustled Fiery or Creo network controller do not communicate with the machine. Check all cable from net controller to ...

Xerox WorkCentre 6015 - Error Code: 027-452

Printcopy.info https://printcopy.info > code=027-452
Code: 027-452; Description: IPv4 Duplicate Duplicate IPv4 addresses detected upon startup. Causes: Remedy: 1 At the printer's Control Panel, press the Menu ...

Xerox DocuColor 242-252-260 error code 016-311 Xerox Docucolor 240 242 250 252 260 Errors
http://ankitguptajaipur.blogspot.ca/2015/06/fault-code-xerox-dc-240242250252260wc.html
http://www.support.xerox.com/support/docucolor-242-252-260/documentation/enus.html http://printplanet.com/forum/digital-printing/digital-printing-discussion/21289-service-manual-for-dc242-252

replace main moter

how i Fix Eror Code 010-320 In xerox 252

error code 010-319 replaced fuser still the same

Try this link:
http://www.copytechnet.com/forums/xerox/22839-xerox-workcentre-7132-wrong-093-311-093-310-a.html

foult code 093-317

Take a look here.  There are many manuals
http://www.support.xerox.com/go/results.asp?Xtype=docs&prodID=DC242_DC252_DC260&Xcntry=USA&Xlang=en_US

Hi, you have to reset this code entering into diagnostic mode, If this fault is declared 3 times in succession, print and copy mode will be disabled. In order to clear this condition, reset NVM location 744-003 to 0. Saludos from mexico

Xerox Docucolor 260 Fault Code - 042-326