Hi our 3 in 1 printer keeps freezing can you give

Ask a friend/neighbour/family member if you can store the meat in their freeser for a day or two. keep an odd item ir two in the freezer see if it freezes. If it does then replace your dood in it which should be frozen by then.I give freezers a chance or two when things start to go wrong. As your issue was caused by leaving the door open there is probably not a fault, If it is resolved fine. If it is not then think about the repairman. As I am a little overcautious I tend to buy a new machine when white goods go wrong.

GOOD LUCK

Hi,
You could try the usual reset (unplug from mains for 30 seconds and restart). It seems to be a problem with the motor though.... could be tricky.
You can also try this:
1- Switch the printer off.
2- Press and hold both the Red X button and the Right Arrow button (printer is still off)
3- Keep pressing those buttons and press the Power On button once to start the printer... keep holding X and Right Arrow.

The goal is to have the printer display a "Printer Settings Init" message. Then you can let go the two buttons.
If you don't get the message, try the procedure a few times.

Sounds like a glitche in the thermostat. First, override the program & see if it does the same thing over the next few days.

Hi Pete,

Ideally it should not give this error however there are few steps that can fix the issue.

I would like to direct you to a link that will be helpful for you in many ways to resolve most of your printer issues.

Click on this link -> Link

Regards,
Sean

There are 3 main fixes for a freezing SE.
1> Have the latest 12501 update installed, the 12124 had a problem.
2> make sure you have the right hook (the 2 older hooks have this problem.
3> The newer tension assembly with the grounding strap needs to be in the SE as well.
4> there were only suppose to be 3 but if your screen gets weird when it freezes, it could be the video transformer

Format the harddrive, or go to the properties and change the setting that says leave copy on the harddrive, if all this not working try to initialize the memory and you will be fine.
double check on the driver properties check if it says direct printing or it keeps any copy on the machine.

Regards

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

maybe you should try different games? see if those different games freeze, if so, then it might be your blu-ray player in your ps3, or your ps3 might be overheating. my games froze at certain points because my ps3 was overheating, just try a few different games

there have been many issues with formatters on both those machines, such as usb not working right out of the box,
1. flash the firmware for the machine.
2. if that doesn't fix the problem then replace the formatter board.
3. also use the pcl5 or 5e drivers, they tend to be more reliable than the pcl6 drivers.

dont worry it caused by some virus attack in phone . first remove the memory card . then switch offf the phone . hold *,3 and green dial key together . then switch on the phone without relasing it . be sure all the keys are pressed firmly together . then the phone show a blank white screen for sometime then ask for time zone as if u buy it first time . if the roblem is solved format the meory card . the virus usally resides in memory card

is it the last request for print or all the print jobs