A friend gave ne an old Symphonic TV with its Remote control. Trying to program my TV but the remote has the ''UP'' , ''DOWN'' , ''LEFT'', ''RIGHT'' arrows but NOT a ''SELECT'' button. I do I lock-in the selection???

Search Results

Need codes for ct-300 clear tunes universal remote - Fixya

www.fixya.com/.../t17341079-need_codes_ct_300_clear_tunes_universa...
Mar 26, 2013 - need codes for ct-300 clear tunes universal remote Need codes - Symphonic ST419E TV ... Universal remote code for a panasonic ct-27g14a.

I have a clear tunes tv and trying to program my RCA universal

www.fixya.com/support/t25649135-clear_tunes_tv_trying_program_rca
Apr 16, 2015 - ... a clear tunes tv and trying to program my RCA universal remote to it ... "I need to program an old Panasonic TV with a RCA universal remote ...

I need the codes to a clear tunes remote for a rca - Fixya

www.fixya.com/support/t3026751-need_codes_clear_tunes_remote_rca
Sep 26, 2009 - I need the codes to a clear tunes remote for a rca tv. ... "I need toprogram an old Panasonic TV with a RCA universal remote model RCR311St ...

Radio Shack panasonic remote control codes clear tunes tv ...

www.fixya.com > ... > panasonic remote control codes clear tunes tv
...remote. the panasonic codefor my radioshack 3-in-one remote is 0250 I need a codefor a VCR Durabrand (DCV603) for the Sony universal remote control or a ...

Clear tech tv 4 digit code - TV - Other Consumer Electronics

These are the setup codes: 0180 0171

These are the steps on how to program your RCA Universal Remote Control to your Symphonic TV.

1. Press and "HOLD" CODE SEARCH.
2. Press and release the TV button. When the TV button flashes proceed to the next step.
3. Enter the three digit code. In your case, the code for the Symphonic TV are 064 or 076.
   
4. Release CODE SEARCH.
5. With the TV on, press another button, for example CHANNEL UP. If the TV responds, no further programming is required. If the TV does not respond, repeat steps 1-5 using the other code number.

me too but its for a symphonic tv

JENSEN UNIVERSAL REMOTE

i dont know how to program the remote for tv..i got the codes

how program my control sanyo for tv curtis mathes

I have a Symphonic also and I was able to program it to watch TV using the dfirections on teh inside of the battery door. Try it! I can't get VCR to work though.

155 worked for me.

The Directv remote isn't capable of fully emulating the native remote of the Symphonic Combo. You can get limited functionality though.

1. Move Remote slider to "AV1" position.
2. Hold down mute and select until you get 2 flashes of the green light, then release both keys.
3. Enter 20821 and observe 2 more flashes of the green light.

Next lock the volume controls to this device.

4. If you have moved the remote's slider from the AV1 position, move it back. The slider should remain on AV1.
5. Hold down mute and select until you get 2 flashes then release both keys.
6. Enter 993 and observe 2 flashes.
7. Press and release THE SELECT KEY and observe 2 more flashes.

You can control the TV's power using the big power button under the device selector.