Miele DG4082 control panel not working - Miele DG 4080 Stainless Steel Electric Single Oven

disconnect your oven from the electricity supply for one-two minutes to see if it resets.

Also...
https://www.mieleusa.com/c/contact-11.htm

Question edited for clarity, spelling and 'make model (what it is)'.
Question moved from Miele Coffee Maker to Miele Oven.

Disconnect it from the mains supply for an hour. If that doesn't work, disconnect it overnight. The idea is to reset the control board.

There are instructions here on Fixya on how to enter the programming mode and Reset on a Miele 4082 Steam Oven. Worth a try.

https://www.fixya.com/support/r26945157-reset_miele_steam_oven_enter_hidden

And here is the Manual, just because I can across it.

https://www.manualslib.com/products/Miele-Dg-6200-4050858.html

..

This is what worked for my Miele. I used the "self clean" function after couple of years of use and once it was done, the panel showed "Error F" without a specific number. The sales guy where I purchased the oven from, suggested that I turn the breaker off for 30min for a complete reset. Did not work. Based on a friend's suggestion, I initiated the "self clean" again and canceled within a minute. And the door was unlocked !!! A safe try, before calling for the service.

Hello Gillian Pelham,

There is indeed a "RESET FUNCTION" on page 21 of your owners manual...

Depicted below at the associated PDF :

http://www.manualguru.com/miele/h4080bm/users-manual/page-21

http://www.ask.com/web?q=miele+h+4080+bm+ownrs+manual&qsrc=1&o=0&l=dir&qo=serpSearchTopBox

Miele fault code f04 Ovens Questions & Answers - Fixya

www.fixya.com > Forum > Tags > fault code f04 > Ovens

Miele ovens fault code f04 related questions and answers. ... Can't use my Meilepyrolitic oven fault 90 I turned it off at the main power source and then ... fault 23 is displayed on the control panel after using teh self clean function on our miele ...

[PDF]USE & INSTALLATION MANUAL - Smeg

www.smeg.com.au/smeg_au/docs/user_manuals/DOA330X.pdf

Smegelements or interior surfaces or racks of the oven during or immediately after use. During the oven ..... locked automatically due to self-clean mode. "USER LOCK" is ...These codes are displayed when the electronic control detects a ...... The ovens feature a pyrolytic self-cleaning function ..... F03 or F04 Error appears.

[PDF]user manual e:line built in ovens - Appliances Online

manuals.appliancesonline.com.au/epee63cs/epee63cs.pdf

For a manual go to miele.com.au/au/domestic/service/aftersales_operating instructions and download the book. Beware, its 80 pages.
Alternatively, just go to www.miele.au and search the site with your machine model number, it took me 30 seconds.

Check your house panel and reset the breaker for the stove.

Hi the is a two year g/tee on all Miele appliances. I would contact Miele and book a service call. The appliance most likely requires new clock. Modified clocks are available which allow you to change setting via control knobs rather than keypad.

F23 means that the required pyrolitic temperature was not reached during the self-clean cycle. If the other half of the oven does not do this, then it could be a problem with a door lock switch or one of the overtemp sensors.

If there is no heat in fan oven , then it is 99.9% certain that the fan element is faulty..if your oven has a removable rear panel inside, take it off and you will see the element, Replace as req'd.
Plz rate this solution.
Thanks.