How do you unhook safety switch under seat please?

Under the seat,there is a button type knob that pushes on the seat safety switch plunger. To get to this switch,the seat has to be removed. There under the seat you can see the white plastic knob holding the safety switch. When you sit in the seat the,the safety switch plunger is pushed in and completes the circuit allowing the tractor to start and run. When you leave the seat the plunger for the safety switch is released and the circuit is broken and the tractor motor quits. This is one safety switch of four switches in the electrical system. Sincerely,Brad Locke

there are 3 safety switches,clutch,deck and seat, Craftsman 247288810 Lawn Tractor Parts
take the cover off so u can access the coil,unhook the black wire from the coil,not spark plug cable,try to start it,if it starts then a safety switch is bad,if it doesnt,then jump the solenoid,if it starts then it is the seat or clutch switch,if you want to bypass safety switches,connect a switch to the ground and coil

that is the motor number,we need the tractor numbers under the seat,if a belt went bad,then the problem is a safety switch,take the top of the engine off and unhook the little black wire from the coil and try to start it,if it starts,its a safety switch,seat,clutch,deck

ck your occupant (seat) switch it might have gotten dislodged or unhooked when fueling it

some of the switches you need to remove the seat cover to install the switch

All riding mowers have a seat safety, blade engage safety and a brake clutch safety, some mowers have a reverse mowing safety. Seat under the seat, blade and brake you will have to check the linkages underneath, and if there is a reverse mowing one I have seen them near the shifter handle right under the fender.

sounds like the safety switch under the seat may be bad. unhook and / or bypass the switch. if this fixes the problem then replace the switch. hope this helps you

sounds like the carburetor needs cleaned/rebuilt, Tim

Switch under seat needs to be plugged in and make sure the pto lever for the blades is depressing the safety switch. If you are sitting on seat and seat switch is plugged in properly and it cuts off when brake is released then it is seat switch. It is about a $10.00 part; no big deal to replace.

your mower deck safety switch is broke or it has come unhooked.this will cause it to die when you engage your blades .