Washing Machines Logo

Related Topics:

Question about Washing Machines

1 Answer

Bodymax R70i rowing machine error 4 code - Washing Machines

Posted by Sean Cronin on


1 Answer

adnan shabbir

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    A rookie expert who has answered 20 questions on their first day.

  • Contributor
  • 24 Answers

An error code 4 on the Bodymax R70i rowing machine typically indicates a problem with the resistance system. This could be caused by a number of things, such as a problem with the resistance motor or with the resistance control system.
Here are a few suggestions for troubleshooting the error code 4 on your Bodymax R70i rowing machine:

  1. Check the resistance level: Make sure that the resistance level is not set too high, which can cause the resistance motor to overheat and shut down.
  2. Check the resistance motor: If the resistance motor appears to be overheating or making unusual noises, it may need to be replaced.
  3. Check the resistance control system: Make sure that the resistance control system is properly connected and functioning properly.
  4. Check the flywheel: Make sure the flywheel is not locked, if it is locked it will cause the resistance motor to burn out.
  5. Check the power supply: Make sure that the power supply is working properly and that the machine is properly plugged in.
It's worth mentioning that, troubleshooting and repairing a rowing machine can be complex and may require special tools and knowledge. In this case, it's best to seek the help of an authorized service center or a professional technician who can diagnose the problem and fix it. Contact the manufacturer for assistance or for more information about the repair cost and the estimated time of repair.

Posted on Jan 18, 2023


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


What to do to get your Whirlpool dishwasher to start when the light keeps...

<span>Hello,<br /><br />To reset the dishwasher push in this order the,<br /><br />HIGH TEMP WASH- HEATED DRY- HIGH TEMP WASH- HEATED DRY - CANCEL/OFF<br /><br />the control will be reset...but more importantly how many times in a row does the light flash..it will indicate what error code its displaying??<br /><br />example if it flashes 4 times then a pause then flashes 4 times again its displaying the error code#4<br />7 flashes then pause then 7 flashes its displaying the error code#7 ect ect<br /><br /><br /><br />GENE</span>
on Sep 06, 2011 • Dishwashers

What is the top 10 Rowing machine?

There are lots of rowing machine in the local market.there is best 10
1.Concept 2 model D
2.Concept 2 indoor rowing machine
3.Water club
Click the link for more 5
Best Rowing Machines Compared Get The Best Rowing Machine

Healthstream Evo Treadmill. When I turn machine on, all I get is 3 Beeps. The screen display has 8 rows,The 6th row is fully on. The bottom the alpha numerals,the center led of each unit is also lit.

Sounds like a fault in in the treadmills computer system the beep3 are error alert sound meaning somethings has gone wrong inside or the motor is reporting jamb fault code etc and its displaying with the lights upon the display board an error code a treadmill enginer will understand

3 lights and loud beeping

When you start your machine is the water just go stop go stop,
Just wait for the machine to display an error code on the wash progress lights and beeps constantly.
It could be the Rotor Position Sensor, out of balance switch or lid magnetic reed switch.
Your error code will determine this.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128


The dishwasher will not come on and the clean light is flashing.. We have hit the cancel button but the light is still blinking. We have also un plugged the dishwasher to try to reset it and the light is...


I have wrote a tip about resetting the control which i have posted below. My question though is how many times in a row does the light flash,depending on the consective times it flashes before pausing them flashes the same number of times indicates what error code it is...example if it flashes 7 times in a row that is error code 7 if it flashes 4 times that is error code 4 and so on
here is that tip of what ya need to do to reset the control board

please reply with how many times it flashes then pauses then flashes again and i will determine what error code is being displayed


Get half way thru and stops

Hi just read your posting.Now when the machine stops does it beep and show an error code?The error code will be shown in the LCD display if you have that model or by a series of lights that come on while it is beeping.If you have the model with the lights then on that row of lights ,"there will be 8 in the row" starting from left to right what lights have turned on while it is beeping?Are they the 3rd and 6th or 2nd and 7th --etc--?Please reply with additional information about the error code and I can guide you throe this problem.

My Brother MFC-5440CN states machine error 7E. Help!!

error 7e means "no head parameters stored in the eeprom".

1) locate the head data sticker at the front left of the machine. it should have a 12 digits number at the top row and headx..... at the second row. the data is the 12 digits number. if the sticker is missing somehow, there's another one at the head/carriage unit.

2) enter maintenance mode.

3) enter 6 and 8 for property data entry

4) enter 2 5 8 0 within 2 seconds and you're at the data entry state.

5) key in the 12 digits number. use # and 1 to 6 to enter letter a to f.

6) hit the ok button. machine should beeps and display "input accepted". if it say "input error" there's a checksum error, meaning you keyed the number in wrong. it will return you to the data entry state.so just key the number in again (step 5).

7) exit maintenance mode. done.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Washing Machines Experts


Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19166 Answers


Level 3 Expert

2511 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides