Pinout for Kenwood KDC-1030u - Kenwood Car Audio & Video

This often doesn't work because the radio is monitored by the Body Control Module on the 5 volt computer network.


Wiring

Subaru Legacy, Outback, Baja (1993-2008) Car Stereo ...

Pinout Guide https://pinoutguide.com > ... > Subaru pinouts
Oct 22, 2019 - Pin #. Function. Legacy / Outback / Baja Factory Radio Connector Wire Color (wires go to car's Speakers, etc.) Subaru After-market Harness ...

2000 Subaru Impreza Car Stereo Wire Colors and Locations

the12volt.com https://www.the12volt.com > installbay > stereodetail
2000 Subaru Impreza Stereo Wiring ; Left Front (-), Green/Black ; Right Front (+), Red/Yellow ; Right Front (-), White/Black ; Rear Speakers, 6 1/2" Rear Doors.

Installation kits

https://www.google.com/search?q=2000+subaru+outback+stereo+installation+kit

./.

https://elektrotanya.com/kenwood_kdc-mp2035_kdc-mp205_kdc-mp235_kdc-mp235cr.pdf/download.html
J1 connector - page 28 (top right), page 29 (top left)

Kenwood KDC 139 displaying :OCER - Fixya

www.fixya.com > ... > Car Audio & Video > Kenwood

Nov 19, 2019 - OCER indicates that the unit is in protect mode. First press the reset button (tiny pinhole button). If the unit comes back on saying OCER then most likely there is a ... KDC-139 error code DCER won't - Fixya
Sep. 28, 2008
SOLVED: Where is the reset button positioned in KDC-139 ...
Oct. 2, 2015
SOLVED: My kenwood KDC-139 when its turned on display ...
Feb. 13, 2011
KDC-139 DCER DISPLAY - Fixya
Oct. 3, 2015
More results from www.fixya.com

Kenwood Kdc 139 - BoostCruising

www.boostcruising.com > advice > 456667-Kenwood-KD...
( 92waggz ) hey guys my mate has a kenwood kdc 139 headunit and the code DCER or OCER is coming up i have had a search around on the net to fidn a ...

KDC-MP439 KDC-MP3039 KDC-MP339 KDC ... - Kenwood

manual.kenwood.com > B64-3901-00_00_MW_En

PDF Clock display (KDC-139) ... demonstration. KDC-139. Display. Setting Setting overview. Source. "CLCK". Refer to page 11 ... you have to start over from step 4.

Try Kenwood's website to see if at installation manual is available.

Check the

The wiring diagram is on page 33 of the manual.

Ignition wire is NOT red
Battery wire is NOT yellow and
Ground wire is NOT black on the Z828 U4

Nobody is that stupid they couldn't have already figured it out if the colors were that obvious, hence they posted a query on this crappy site. The closes pinout I could find for this model is attached. You will likely have better luck doing a 12v test with a voltmeter.

Page 27 of the installation manual shows the pinout.
http://manual.kenwood.com/files/B64-2950-00_En.pdf

Red is accessory power
Yellow is to the battery