Fix colors adjustments after factory reset in printer ricoh spc262

2 Answers

Anthony

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Legend:

An expert who has written 200 answers of more than 400 characters.
Expert
419 Answers

After a factory reset, the color adjustments in a Ricoh SPC262 printer may need to be reconfigured. Here are the steps to adjust the colors:

Load paper into the printer.
Press the "Menu" button on the printer's control panel.
Use the arrow keys to navigate to "System Settings" and press "OK."
Navigate to "Color Adjustment" and press "OK."
Select "Auto Color Calibration" and press "OK."
Wait for the printer to calibrate the colors.
If the colors still appear incorrect, navigate to "Manual Color Calibration" and press "OK."
Follow the on-screen instructions to adjust the color balance, contrast, and saturation settings.

If the above steps do not resolve the issue, it may be necessary to consult the printer's user manual or contact Ricoh support for further assistance.

Posted on Feb 25, 2023

Lecchi Roberto

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Welcome Back:

Visited the website for 2 consecutive days.

Mayor:

An expert whose answer got voted for 2 times.
Contributor
13 Answers

To fix color adjustments on a Ricoh SP C262 printer after a factory reset, follow these steps:

Open the printer driver and go to the "Maintenance" tab.

Click on the "Adjust Color" button.

Follow the prompts in the wizard to adjust the color settings for your printer. This may include adjusting the color balance, gamma, and other settings.

Click "Apply" to save your changes.

Print a test page to see if the color adjustments have been successful.

If the color adjustments are still not satisfactory after following these steps, you may need to calibrate the printer. To do this, follow these additional steps:

Open the printer driver and go to the "Maintenance" tab.

Click on the "Calibrate" button.

Follow the prompts in the wizard to calibrate the printer. This may include printing a test page and adjusting the settings based on the results.

Click "Apply" to save your changes.

Print a test page to see if the color adjustments have been successful.

If you are still having issues with color adjustments on your Ricoh SP C262 printer, you may need to consult the printer manual or contact Ricoh customer support for further assistance.

Posted on Dec 30, 2022

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

How to fix sc542 code on copier ricoh 6600

fuser has problem will need to fix first then reset code

Read full answer

Feb 28, 2014 • Ricoh Aficio SP C311N Color Laser Printer

0helpful

1answer

Reset memory for ricoh sp5100

Not exist memory reset,only Memory Clear.Before execute Memory clear print out all SMC data list.
Enter in SP mode : press Clear(yellow key) press 107 press and keep hold more 3 seconds Stop/Clear(red) key select SP mode select SP 5801 or select using the arrows up/down SP memory clear.Press the OK and execute,when the program has ended normally,the message COMPLETED is displayed.If the program has ended abnormally an error message is displayed.Turn the main switch OFF and ON.Adjust the printer and scanner registration and magnification.Refer to the SMC lists and enter any values that differ from factory settings.Adjust the standard white level,initialize the TD sensor.It is a work from 4-5 hours,good luck.

Read full answer

Feb 08, 2013 • Ricoh Office Equipment & Supplies

1helpful

1answer

Ricoh sp4210n factory reset

see:

Ricoh sp4210n factory reset

http://support.ricoh.com/bb_v1oi/html/oi/re/model/sp42/sp42en.htm

Read full answer

Feb 06, 2013 • Ricoh Aficio SP4210N Laser Printer...

0helpful

1answer

RICOH AP610n Factory Reset

press the counter key and then press and hold the # key and tap on system settings on the screen . it will ask if you want to reset the machine to factory mode, select yes and wait for the machine to reboot.
thanks and all the best.\
for further clarification, call +233243494871

Read full answer

Mar 12, 2012 • Ricoh Aficio AP610N Laser Printer

3helpful

1answer

Ricoh SP C811DN error sc549

unplug printer, wait minute, plug in, should reset.
check Ricoh website to trouble shoot if does not reset.

Read full answer

Apr 29, 2010 • Ricoh Aficio SP C811DN Laser Printer

0helpful

2answers

Manual color registration in Service Mode on CL7200 printer

ok turn the thing on and then open it up and bingo jumbalio!!!

Read full answer

Jan 22, 2009 • Ricoh Aficio CL7200 Laser Printer

1helpful

1answer

Ricoh service mode to reset

This is the solution from Ricoh website:

Please press Menu. Then scroll to Maintenance and press Enter. Scroll to Color Regist and press Enter. Scroll to Color Regist Auto Adjust and then press Enter to Auto adjust. If after completing the procedure the error persists, please contact your service representative for support.

I'm told this works as well...
On the main board put dip switch 101-1 on and then off and then enter 97 and press the aps key. Then power cycle the printer.

Read full answer

Jul 09, 2008 • Ricoh Aficio CL3500N Laser Printer

0helpful

3answers

Color adjust error

problematic machine. transfer belt damaged(white spots ) for temp fix try manual registration from menu

Read full answer

May 09, 2008 • Ricoh Aficio AP3800C Laser Printer

0helpful

1answer

Assembly of Ricoh color laser printer - error message

On the Ricoh 3713 you can do a hard reset by going on the main board toggling dip switch 101-1 on and then off, entering 97, pressing the "aps" key, and then power cycling the printer. Might work similarly on the CL3500N.

Read full answer

Apr 04, 2008 • Ricoh Aficio CL3500N Laser Printer

5helpful

4answers

Ricoh Aficio Color Registration Error

One of our Ricoh CL3500N printers- less than a year old- gave us a "color regist error" after changing the transfer belt.

Ran the "adjust color regist" without results. It would just finish and pop back up with the same error.

Color test page printed no color, just BW

I reseated everything, and even replaced the PCU without positive results.

A couple hours later I went back, took everything out (be sure to keep the pcus out of the light!), and vaccuumed the heck outta that printer.

For whatever reason- maybe there was a chunk of toner hanging out, maybe I knocked something loose or back in place, whatever- but when I put all the parts in and turned it on, the error was gone and color printed great!

Read full answer

Dec 11, 2007 • Ricoh Aficio CL3500N Laser Printer