Hello there,
This is from Page 7 of the
Owners Manual, found through Alpine's site.
1 Press and hold MUTE/SETUP for at least 2 seconds
to activate the SETUP mode.
2 Press or to select the CLOCK ADJ mode, and
then press //ENT.
The time indication will blink.
3 Press or to adjust the hours while the time
indication is blinking.
4 When the hour has been adjusted, press //ENT.
5 Press or to adjust the minutes while the time
indication is blinking.
6 Press and hold MUTE/SETUP for at least 2 seconds
to return to normal mode.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold //ENT for at least 2 seconds
after setting the “hour.” Minutes will reset to “00”. If the display
shows over “30” minutes when you do this, the time will advance one
hour.
• Pressing AUDIO/RTN will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
×