How to reset pantum M7200FDW drum life end 3001

I put in a new toner and it says that drum life end 3001

1 Answer

adnan shabbir

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Greenhorn:

A rookie expert who has answered 20 questions on their first day.
Contributor
24 Answers

To reset the drum life end error message on a Pantum M7200FDW printer, follow these steps:

Turn off the printer and unplug it from the power source.
Wait a few minutes, then plug the printer back in and turn it on.
Open the front cover and remove the drum unit.
Locate the reset gear on the drum unit.
Use a small tool, such as a paperclip, to turn the reset gear clockwise until it stops.
Reinstall the drum unit and close the front cover.
Turn on the printer and check if the error message has been cleared.

Note: The reset gear location and reset process may vary depending on the specific model of your printer, refer to user guide or manual for more details. If the error message persists, or the reset gear is not working, you may need to replace the drum unit or contact the manufacturer for assistance.

Posted on Jan 18, 2023

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

6helpful

2answers

How do i reset ricoh sp 1200s drum unit

why toner life end message keep on showing on sp 1200s prints.

Read full answer

Aug 04, 2012 • Ricoh Office Equipment & Supplies

0helpful

1answer

Brother MFC-9440CN Laser Printer is saying toner life end and I just put a new cartridge in.

If you want to reset your Brother MFC 9440N machine so you no longer have the error message: Toner End of Life, do the following:

1. Open the front cover of the 7820N, that is, the cover that allows you to pull out the toner and drum, but don't pull out the drum/toner.
2. Push the button: Options (located on the left of the control pad).
3. Type: *00 on the keypad.

The Brother MFC 9440N should be reset and the Toner End of Life message should disappear. Warning, this may void your warranty and ultimately damage your machine if you are reusing or refilling your cartridges, but you should already know that. Hope this helps.

Read full answer

Nov 11, 2010 • Brother MFC-9440CN Laser Printer

0helpful

2answers

Yellow Toner Life End message so I replaced it with a new cartridge, and I still have the same message. What do I do?

Brother International - Support for your Brother Product

Read full answer

Oct 22, 2010 • Brother MFC-9440CN Laser Printer

17helpful

1answer

Brother MFC 7820N Toner life end with new toner

I found the following post on another site. It appears to work. If you want to reset your Brother MFC 7820N machine so you no longer have the error message: Toner End of Life, do the following:

1. Open the front cover of the 7820N, that is, the cover that allows you to pull out the toner and drum, but don't pull out the drum/toner.
2. Push the button: Options (located on the left of the control pad).
3. Type: *00 on the keypad.

The Brother MFC 7820N should be reset and the Toner End of Life message should disappear. WARNING: This may void your warranty and ultimately damage your machine if you are reusing or refilling your cartridges, but you should already know that. Hope this helps.

Read full answer

Sep 07, 2010 • Brother MFC-7820N Printer

0helpful

1answer

Toner life end.

-open front cover
-press 'Option' button
-then key *00 on the keypad
-This resets the device so it knows it has had a new cartridge.

I hope it helps

Read full answer

Apr 11, 2010 • Brother MFC-8860DN All-In-One Laser...

1helpful

1answer

I replaced the toner in the MFC8860DN. I still says toner end life. I took the entire drum/toner assembly to another MFC8860DN and it works fine. So, the problem is NOT in the toner/drum assembly. Can you...

-open front cover
-press 'Option' button
-then key *00 on the keypad
-close front cover

hope it helps

Read full answer

Mar 11, 2010 • Brother MFC-8860DN All-In-One Laser...

8helpful

2answers

BROTHER MFC 7820N MACHINE PUT IN NEW DRUM, CHANGE DRUM MESSAGE COMES ON. PUT IN NEW TONER, TONER END OF LIFE MESSAGE COMES ON.

To manually reset the counters, do the following:

Open front cover, press "option".
Answer Yes (by pressing 1) to the question in the display.
Your drum counter is now reseted. Press "option" again.
This time, press *, 0, 0.
Your toner counter is now reseted too.

(If nothing happens when pressing option, try using the back/clear button instead.)

Read full answer

Jun 15, 2009 • Brother DCP-7020 All-In-One Laser Printer

5helpful

2answers

Toner life end

Try this:

Open the cover, leaving everything inside. Press Options, then *00 to reset the fax.

If that doesn't work:

Open the front cover and remove the cartridge and drum. Turn off the fax. On the right-hand side of the cartridge, there is a round hole that is covered with a clear plastic or glass. Cover that hole up with tape, put the cartridge back in the drum, and put them back into the fax, and turn it back on.

Read full answer

Dec 05, 2008 • Brother IntelliFax-2820 Laser Fax

65helpful

4answers

Brother MFC 8860DN Toner End Life Error

Open the door where the toner goes. Press the 'back' button. Press *00. Do not respond to the query about the drum. Close the door. Other models may have to press the 'Options' button located near 'Copy'. This should work.

Read full answer

Jul 08, 2008 • Office Equipment & Supplies

5helpful

2answers