Error code ccf01 bizhub 215

It is a generic warm up failure. You need the service call.

Code: C3451 · Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature

PREVIEW
1:49 How to solve error code c3451 in Konica Minolta Bizhub 215 ...
YouTube · Daily new solutions Oct 22, 2020 PREVIEW
6:45 SOLUTION MACHINE SERVICE CALL c3451,c3452,c3751 ...
YouTube · COPIER ZONE Nov 30, 2020 PREVIEW
13:41 SOLUTION MACHINE TROUBLE SERVICE CALL (C3451 ...
YouTube · COPIER ZONE Dec 20, 2020 PREVIEW
5:21 COPIER MINOLTA Bizhub 195 215 235 TROUBLE C3451 ...
YouTube · Tomasz Jemio?ek Nov 22, 2018 View all

Konica-Minolta bizhub 195 - Error Code - PrintCopy .info

https://printcopy.info > model=bizhub 195 > code=C3451
Code: C3451; Description: Warming-up failure - The thermistor/1 (TH1) detected that the temperature of the surface of the fusing roller did not reach the ...

• 
  

  Konica-Minolta bizhub 350 - C3451 - PrintCopy .info

  https://printcopy.info > model=bizhub 350 > code=C3451
  Konica-Minolta bizhub 350 · Code: C3451 · Description: Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature ...

CHANGE YOUR DRUM UNIT OR DEVELOPER

no luck in the service manual for that one please recheck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NO such code for that machine

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

model#

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

One of the rarest machines in the Konica Minolta line up!!!!!
A printer without a control panel. the code deal with one control board not talking to another, recommend a tech look at it he might be able to re-flash the firmware the copiers operating system worse case one or both boards are bad. Is the machine on a good surge protector not an Ace hardware 9.99 special? Nothing against Ace. But a thousand dollar machine should be protected with a good minimum 100 dollar surge protector.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Power off the machine wait ten seconds then holding the down the clear/stop button power on the machine. should clear the code if the code comes back replace the fusing unit the hot part!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Error Name:-
machine trouble service call c03ff