My scanner HP 9120 FN2 Shows the error code 30.03.23?

'scanner error 12'

The jet is clogged in the ink tray. Use alcohol or WD40 with a long Q-tip to clean out the clog.

According to the manual found at support.hp.com, you need to go into the setup menu for faxing and enter the necessary information prior to faxing.

iwant todownload visioneer onetouch 9120 usb scanner driver for windows vista

hold down blue red and left scan buttons for 10 secs, in boot menu press shift then 1

1st, the 9120 is a 700, 1000, 1500, 2000, 3000, 5000 or 6000 Va
if it is a 6000 Va that voltage sounds ok, and the ups as no problem, each battery will be around 12,75 Volts, it will be higher and the charging circle ends.

i want free download hp officejet 9120 printer drivers what a i do??

sounds like inverter is unhappy(causing the input fuse to blow. maybe, just maybe, this Powerware 9120 has given up the ghost? The inverter can short for a variety of reasons. Try to take out the battery completely, and run it as just a power conditioner. If that works, then you have an unhappy inverter in there.