I have a Telefunken 32HD serial no. 32HD0420140957 ...The red light is on but tv will not switch on even with remote ,what could the problem be

Try contacting the manufacture

I have a paktech HDTV universal tv remote H-1080E and want to connect it with a telefunken tv but don't have a user manual

How To Program Telefunken TV Universal Remote?

1. First you need to "Turn The Device On"
2. Press the "TV" on your "Telefunken TV Universal Remote"
3. Now press and hold the "Setup button" of the Universal Remote until it shows the "Light Flash" (It means it is in "Learning mode")

https://universalremote.codes/telefunken-tv/

The indicator lED at the remote control do flash, means it does not work properly. Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Sounds like main board fault. Contact any service technician, to make it confirm. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

no cap blow

My MR701 Telefunken TV set does not want to switch on with its remote control.When I switch of the plus nad then on again. It switches on and a sign with the key and wording MENU appears after few seconds it switches off again.Some times it does swtch on with a universal remote. The red light where the sensor is keeps on lickering when its on standby.Under normal circumstances it stays red without flickering when the TV set is
on standby. Please help.

Replace e-prom.