Logix 28" television, model 28L1002 remote control replacement?

clean the contacts from USB, other reason can be is that some wires is loose or bad contact. Open the control, and clean the ribbon or plastic cable with pencil erase from dirty , and corrosion and try again.
If the problem persist you have problem with the Syscom circuit and associates. see the diagram
God bless you

028,017,033,018,047 are the codes to check. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

LOGIX 40345 1960HTC ( PASWAD )

probaly invertor board

Hello
If your Tv is LOGIK; skay remote codes are :

221 033 061 039

726
If it is LOGIX; code is:

696
OK.

Just ask at http://manualfox.com/remote.htm
- they find you every remote code. Send them model #s of TV and remote!

Found the correct code for my TV & Sky remote... I searched a fair bit more on google for... "WS6680SIL/C7 code" and found... http://www.sjstv.co.uk/skycodelistNEW.html which the correct code for my Bush TV - 0742. Others you may want to try are Bush 0157 246, 263, 377, 037, 064, 065, 310,300,383, 399, 391, 402, 339. or Beko 0125 514, 398. Further, Alba Group are the firm whom own Bush brand amongst others. Google Alba Group to get their site and links to Bush sites.

Here is the manual in pdf format
http://www.hifi-remote.com/manuals/manual.shtml?urc22b_7

Would need to know make and model #
the codes are on the manufacturers website
or
http://www.xdiv.com/remotes/
http://www.oneforall-int.com

We had this problem with a 28PW6515. The control would work for 30 seconds after switching on, then nothing. It was diagnosed as the "glue chip" which handles all the control functions. About £200 to fix it as it's a surface mount chip.