Toshiba 255 touch screen not working?

Ideas in the links. The obvious one is load paper and make sure the drawer is locked tight.

Toshiba E Studio 255

Copytechnet https://www.copytechnet.com > ... > Toshiba
Jun 4, 2013 - It sounds like that the document feeder original placing sensor not come to home position after last original was feeded. Check that sensor. i ...

Toshiba e-Studio 255 - CB30 Error
May 5, 2021
Toshiba e-Studio 255 LCF Problem
Nov 2, 2019
Load LT-R and press [START]
Apr 14, 2021
Toshiba Estudio 255se printing envelopes
Nov 11, 2020
More results from www.copytechnet.com

Toshiba e-STUDIO857 - Says LT Tray is Empty When Full

Spiceworks Community https://community.spiceworks.com > topic > 1597550-...
May 6, 2016 - This happens when the paper sensor is jammed or broken and not detecting the paper level. If it's just jammed, a simple cleaning can resolve the ...

PRINTER PROBLEMS

Toshiba https://business.toshiba.com > downloads > contents
If [Fit To Paper Size] is selected, check the loaded paper and the paper size setting. Macintosh: The setting is selected in the [Page Setup] menu.

https://www.google.com/search?q=toshiba+e-studio+255+load+paper+error

..

Make sure the machine is off. While holding down the "0" and "8" buttons on the keypad, turn the copier back on. Keep holding the "0"' and "8" buttons until the copier lets out a long beep.

How to Reset a Toshiba Copier - Techwalla

https://www.google.com/search?q=toshiba+255+photocopy+reset+button

..

my guess, is you tried to say
Is this PC, or a printer, or what, BIOS ROM system board.???
"how to see what version BIOS I have." how is key word.
all PCs made on earth go in to BIOS screen and look.
it is there.
when you turn on a PC , it even prompts you for the BIOS hot key.
you hammer that and bingo into BIOS screens you go.
what is e255? must we guess, google fails me.
ahh this.
Toshiba eStudio 255(printer) or SR255?,NB255, (nb=notebook)????????? any clue helps
what is this THING you are touching, please.

old as hills, PC, zero support of this PC fan no BIOS updates, now.
so why ask>?
is this the MELTDOWN panic issue> say so, first. ok?
world wide meltdown panic, WWMP?

this? Google shows only this with 255 + PC words searched.
this?

NB255 presented above.

dose the key pad works??

There is no reset other than unplugging the power for a minute then plugging it back in.

If this in under warranty I would contact the manufacturer via the information in your owner's manual for a free repair.

If for some reason you don't still have yours, you can download Kitchenaid / Whirlpool owner's manuals and installation instructions here.

If it's out of warranty, we repair these controllers for $39.95, or you can order an LCD assembly (part number ) from the Pros here or get a refurbished unit from us here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

There should be a reset on it and it should bring it back.

If the touch screen is working well,then you only need to buy the LCD sreen,but usually suppliers will send the LCD with touch screen as they are one whole part.you can try to contact :
[email protected] for further information about it.

My 42" Dynex just did the same thing. 65535 NO SIGNAL.
The channel label for this said "ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ"

I went to menu... Channels .... Set for Cable TV... Scan Channels.
It rescanned. It took twice as long as normal to scan.
After the scan completed it worked fine except of one thing.

ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ stuck on the screen.

I shut the TV off, then things returned to normal.

Hope this helps.

Notes:
This TV is only 6 weeks old.
Cable hook up.
It is -plugged into a brand new UPS power supply.
I used the sleep timer to shut off TV. The 65535 problem occured the next time the TV was powered up.

sounds like the main control panel..