Possini Euro White Flower 19 1/2" Wide Pendant Chandelier installation instructions

The ones I have changed have a small screw off glass cover and then you pull out the small halogen bulb. Don't touch the glass when you replace it.

https://www.google.com/search?q=Possini+Euro+Design+Clear+Glass+Tube+LED+Mini-Pendant+Light+change+light+bulb

,,

Since you've already checked the wiring and circuit and found no issues, it's possible that the problem lies with the fan's motor or capacitor. Unfortunately, repairing these components can be difficult and may require the assistance of a professional electrician or repair technician. I do understand this is a costly fan.

If you're comfortable working with electrical components and would like to attempt a repair yourself, you can try replacing the motor or capacitor. However, I would strongly recommend that you exercise caution. To contact the manufacturer of your Possini 52" Encore Hugger Ceiling Fan, YG217LED-LP-1L, you can try the following options:

Possini Euro Design Customer Service: You can contact Possini Euro Design customer service by phone at 1-800-782-1967 or by email at [email protected].

Lamps Plus Customer Service: Lamps Plus is the parent company of Possini Euro Design. You can contact Lamps Plus customer service by phone at 1-800-782-1967 or by email at [email protected] .

Online Contact Form: You can also fill out an online contact form on the Lamps Plus website to get in touch with customer service.

Question edited for a lot more clarity.
Question moved from Cars and Trucks.

There is no wiring diagram available.

https://www.google.com/search?q=possini+euro+segue+24+wiring+diagram

And it appears to have no maker so it is made in China despite the Italian name. It is an Amazon, Target, Walmart and Sears Special. Ask on Amazon Questions if someone has the wiring. The reviews are mixed and a number say the fan is loud!

https://www.google.com/search?q=possini+euro+segue

..

Go talk to an electrician if your not sure. They should not charge you for advice.

If you go to an electronics supply you can match most leds, maybe no perfectly but similar in brightness and pin size.

Make sure the wall switch is on or the remote won't work. If The fan still doesn't work, then you probably need a new receiver.

use the same as when you took it down, white is neutral, red is power from switch, green is ground, look at wiring for new chandelier instructions should tell you what goes where, if al else fails get an electrician to wire for you

Lutron Dimmer manuals
http://www.lutron.com/Service-Support/Technical/InstallationInstructions/Pages/InstallationInstructions.aspx?syst=Dimmers+%26+Switches&prodn=Maestro%C2%AE+dimmer+%26+switch

Lutron manuals show a couple things that might be affecting you lights.
1) Wattage: If you have wrong wattage dimmer
2) Type of light bulb: Dimmers work on different types of bulbs
3) Wiring: You say you got 3 wires going to the chandelier? Why you got 3 wires? Is this a 3 way switch? Are the chandelier bulbs wired separately so you can control groups of bulbs with different switches?
Does the dimmer have 3 screws? A dark-colored screw and 2 brass screws? If so, then that sounds like a 3-way dimmer. A 3-way, is where more than one switch controls the same light.

Does the dimmer have 2 screws? Then that dimmer controls a single circuit. Your black Hot wire from breaker box connects to one screw and the black wire to Load connects to other screw.
A quick glance at Lutron wiring manual shows that Hot and Load wires connect to either screw.
The question is your 3-wires from the chandelier ... does the black Hot wire from breaker arrive in the ceiling box first? Or does it arrive in the wall box first? If your Hot arrives in ceiling box, then the Hot must come down to the switch box and connect to a screw on the dimmer >>> a second wire connects to other screw on dimmer and travels up to the ceiling box where it connects to black wire on chandelier. The white wire on chandelier connects to white Neutral.
4) Dimmer might be bad

I'm assuming this chandelier has the standard round screw base connectors for the light bulbs. Check the connection with an ohmmeter, which wire is connected to the center connection and which one is connected to the outside threaded screw. Connect the one which is connected to center connection to the black wire, and connect the other one to the white one.