Bowflex Treadmill Series 7 Logo
Posted on Sep 21, 2009
Answered

My Freespirit also stops after a few minutes

I have the same problem, treadmill starts and after a few minutes stops, but the display panel continues as normal ( it doesn't show any type of error) . When I unplugged the power cable and reset, it starts again but stops after 5 minutes.

Answer This Question
  • Anonymous Mar 13, 2014

    The panel is lit up and everything looks normal, but when you press start, nothing happens. Unplugged and re-plugged. Turned off and back on. Pushed red reset? button. Again, nothing.

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 4 Answers
  • Posted on Nov 05, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Problem Solver:

An expert who has answered 5 questions.

Joined: Sep 26, 2009
Answers
4
Questions
0
Helped
3451
Points
4

Normally all these problems are in relation with motor itself, I mean, internal bearings, short circuit. So if your treadmill stops is bacause the circuit board detetecs an over current fron motor.

I hope help you

Anonymous

Level 1:

An expert who has achieved level 1.
MVP:

An expert that got 5 achievements.
New Friend:

An expert that has 1 follower.
Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 33 Answers
  • Posted on Sep 28, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
MVP:

An expert that got 5 achievements.
New Friend:

An expert that has 1 follower.
Hot-Shot:

An expert who has answered 20 questions.

Joined: Sep 28, 2009
Answers
33
Questions
0
Helped
36373
Points
51

Hi, Plaese check the Power point

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to enter into calibration mode for treadmill Freespirit model 122 30521..
Of you wish to get some details about treadmill repair service mode and calibration then check the following link
http://electro-medical.blogspot.com/
Read full answer
Jan 15, 2016 • Nautilus Exercise & Fitness
0helpful
1answer

Treadmill stops abruptly i have to reset button then go again for a few minutes
Find out what is overheating it. Most likely something jammed into one of the rollers.
Read full answer
Feb 19, 2015 • Free Spirit FreeSpirit Model 30516...
0helpful
1answer

I have free spirit 30727 treadmill and now have a problem that its not working and giving a error with code of S101-11
LOOK FOR A RESET BUTTON
Read full answer
Jul 17, 2014 • Free Spirit FreeSpirit Model 30727...
0helpful
1answer

Treadmill overspeed.
hi.
i think the problem is with your touch switch panel.
regards,
nuwan
Read full answer
Jan 20, 2014 • Vision Fitness T9550 Folding Treadmill
0helpful
1answer

Freespirit treadmill
Turn treadmill off. Disconnect drive motor wires from lower control board (Mtr + and Mtr -)
terminals. Power up in OLS mode (FAST & START). Bring displayed speed up to 99.
Measure across the Mtr + and Mtr - terminals with your voltmeter (DCVolts). You should
measure at least 90 vdc on a 110V treadmill and 180 vdc on a 220V treadmill.
If you are not getting dc volts out of the lower board, replace it.
If you are measuring the proper dc voltage out, replace the drive motor.
see my personal TIPS for motor help. God bless you 1232c4bc-7349-41aa-9120-7d58645cb442.gifc11b620c-0d7d-410d-9958-64f3636d4ac5.jpg
Read full answer
Jun 05, 2013 • Exercise & Fitness
1helpful
1answer

I would like to know how to fix my treadmill. It's a freespirit, has been working good till now. It will go through the cycle of trying to start but it comes up with a code L5.
check this site http://www.howtomendit.com/answers.php?id=180324. hope this helps
Read full answer
Mar 03, 2013 • Exercise & Fitness
1helpful
2answers

My freespirit treadmill showsL5 on nthe display then quits
If calibration doesn't work replace controller.
Read full answer
Apr 24, 2010 • Spirit ® XT275 Folding Treadmill
0helpful
1answer

We have a Freespirit treadmill model number RT86.We purchased it from Sears about 18 months ago. It has, at times sat unused for weeks, but in the winter it gets used more. Recently after sitting for a few...
Treadmill RT86 FREESPIRIT elevation error
Try resetting to treadmill
http://www.youtube.com/watch?v=TuWLRJiedpw
Read full answer
Feb 12, 2010 • Exercise & Fitness
0answers

Online Manuals for Freespirit treadmill (Sears)
Read full answer
Be the first to answer Apr 09, 2009 • Bowflex Treadmill Series 7
0helpful
2answers

Freespirit Treadmill
Did you try it before you bought it and it was working. when you move the unit and pluged it into the wall outlet was it on? if yes then you may have damaged the lower board. If you can not get that part then the treadmill has died. Is it a Bowflex or a Free spirit.

I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511

Read full answer
Nov 21, 2008 • Bowflex Treadmill Series 7
Not finding what you are looking for?

View Most Popular

Treadmill Series 7

  • Exercise & Fitness

Related Question

How to enter into calibration mode for treadmill Freespirit model 122 30521..

  • Nautilus Exercise & Fitness

Related Topics

1,214 views

Ask a Question

Usually answered in minutes!

Popular Questions

TREADCLIMBER tc5000 error code L5

Bowflex TreadClimber TC5000

Error Code E1

Bowflex Treadclimber

I have bowflex extreme 2. Power rods hit the

Bowflex Xtreme 2 Se Gym

Bowflex error code H05

Bowflex Treadclimber

How do I fix L5 error on a Bowflex TreadClimber tc3000

Bowflex Exercise & Fitness

Best Treadmill
Best Treadmill

View all Fixya Reports

Top Bowflex Exercise & Fitness Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Bowflex Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Bowflex serie 3-5-7 Esploso 3.pdf....

Treadmill Series 7

Loading...