Kitchen Ranges Logo

Related Topics:

Question about Jenn-Air Kitchen Ranges

1 Answer

Jenn-air JGS9900 downdraft slide in gas range - no power and electrical outlet IS working

The display panel and electric burner ignition are not working. The electrical outlet that is it plugged into has power. What can be the problem?

Posted by kirstin on

1 Answer

R SHOAIB

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 567 Answers

There are several possible reasons why your Jenn-air JGS9900 gas range may not have power:

  1. Tripped Circuit Breaker: Check the circuit breaker for the range in your home's electrical panel to see if it has tripped. If it has, reset it.
  2. Loose Electrical Connection: Check the power cord connection to the range to make sure it is secure. Also, check the wiring connections behind the range to ensure they are properly connected.
  3. Blown Fuse: If your range has a fuse, check to see if it has blown. You may need to replace it.
  4. Faulty Control Board: The control board is responsible for supplying power to the range's electronic components. If the control board is faulty, it may need to be replaced.
  5. Faulty Igniter: If the burners are not igniting, the igniter may be faulty and need to be replaced.
If none of these solutions work, it may be best to contact a professional technician to diagnose and fix the issue.

Posted on Feb 23, 2023

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Jenn-Air 30" slide in modular downdraft electric range completely stopped working. Household circuit breaker functioning, range is getting power, no apparent malfunction to power connection which is hard...

Well, it's either all the burners are burnt, or power is not getting to the unit. You have to check where the power stops. Fuses/breakers on the unit? Bad switches? Loose wire?
0helpful
1answer

Oven doesn't heat up all the way on our Jenn-Air duel-fuel range

all repairs should be performed by an authorized service person. if your breakers were tripped there is a high voltage short or weak home breakers. when resetting the breakers make sure the dual breaker switches are in the on position. if the is ok check for the proper voltage is at the power outlet is correct.if it is ok unplug the range. be sure not to break the gas line. remove the rear panel check to see if the power cord power cord is secured to the power cord terminal.if the terminal is damaged do to the shortage at the terminal replace the terminal and power cord. when replacing the power cord and install the power cord restrain that usually comes with the.power cord.
3helpful
1answer

No electrical power to ovens and control panel.

It appears that you have lost one half of your power. That is you no longer have 220 volts but do have 110, enouch to power the electronic ignition. I would check the circuit breaker first to see if it is sending power on both hot wires or just one.
1helpful
2answers

I have a jenn-air 30 inch downdraft electric slide in range jes 9800- I have lost the owners manual. How can I get a new one? The power was off for several hours and I need to reset the clock/day. thanks...

I have 30 inch slide in Jenn air and the black top is blistering and peeling. Jenn air replaced it one but the same thing is happening again. What can I replace this with.
3helpful
1answer

Jenn Air SVE47600b dead touch panel and blower runs constantly

I have had similar problems:
Display was the Part # 71001799 circuit board..$175+labor
Oven blower problem was control relay board, part# 12001689...$224+labor
My solution. replace with non-Jenn Air.
Check Consumer Reports. Jenn Air has high repair history.
1helpful
1answer

How to replace spark igniter - Jenn-Air SEG196 gas-electric range

took off the knob to the ignition system to clean and spray got onto the ignition under the dial and now the two front burners won't ignite unless I turn on one of the functional back burners then turn on the front burner. How do I repair this?
0helpful
1answer

Jenn Air Range SVD48600W (Circa 1998?)

ja_question.gif Why are the oven indicator lights flashing? Answer: When power is first supplied to the appliance, a flashing time will appear on the display.
If a flashing time appears at any other time, a power failure has occurred. Press Cancel, and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
If the indicator lights keep flashing after you have tried to reset the controls, then you may need to contact service person.

This is from the Jenn-Air website.
0helpful
2answers

Don't know if the oven part of range is gas or electric

open the door on the left side low down you will find the model and serial number .
Visit the jenn-air website @ www.jennair.com or click
https://www.jennair.com/customer_care/contact_us.jsp

to email them and they can tell from the serial number and mail you back...
Not finding what you are looking for?

41 views

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3757 Answers

Cindy Wells

Level 3 Expert

6609 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...