LG washing machine leaks when filling - LG Washing Machines

That code indicates that the water is not filling properly. Has the machine been moved recently? Causes of water not filling could be a kinked or clogged water hose, a leaking hose or connection under the machine, or water supply valve not open. Check for water leaks or lack of water supply.

IF it is leaking on the floor, the hose may be damaged or cracked. Since you did not post the model number, it is hard to say what the next step is.

most likely water fill valve is defective and leaking. hot water or cold water? replace which ever is leaking

Washer Not Filling Properly Water Inlet Valve Testing Washing Machine...

Washer Water Inlet Valve Replacement LG Kenmore Front Load Washer Repair...

probably an article of clothing stuck in fill hose from soap dispenser to tub

Hi IE means Inlet Error. The machine thinks that it is not filling (as a certain time has passed without reaching level it wants).
This makes sense if water is running out the bottom.
You will need to find the leak. Maybe the tub to pump hose, or the drain pump itself. Once you stop the leak and the machine can fill in the correct amount of time, you shouldnt see the IE error any longer.
Cheer

take out plug
you need to check the pressure pipe to the pressure switch ...blow air into it and look for any cuts on the pipe ....repair or replace it

It sounds like you are over-filling the drum with water. Check the fill switch. If the fill switch is bad, it will not stop filling with water.

is it a top or front loader?is your drain hose same level as top of machine?if not ,raise hose to level and start cycle.machine will not wash if it does not fill.please reply if u need more help

how do i replace the door seal on my intello LG washer the old one is torn