Every cd is showing as a ''AUDIO CD''

Repair or restall your XP OS. Good luck!

Sounds like drive motor stopped spining required rpm need to replace no fix

make sure that the IDE/SATA Cale that you are usin is workin properly and also make sure that the power cable from the powersupply is workin..while restartin you can press the eject button to see if there will be a Green liht to check if there is a power on the DVD..

3 thinGs to check:

*sata/ide cable
*Power cable from the PSU
*DVD writer if all cables are workin try to connect the dvd writer to a diff computer to check if it is faulty

:)

I think you need to re-install your cd burning software. You not have to but, I would install Revo-uninstaller from CNET.com and delete your burning software and re-install your software.

i have connected LG DVD WRITER in computer but it is not showing icon of dvd writer in computer

use this tool to reset the cd in the registry
after you run the file - reboot the computer -

http://www.dougknox.com/xp/utils/XP_CD-DVD-Fix.zip

Your burner can only achieve high speeds towards the end of the burning progress as the data burned reaches the outer areas of the disc. Burning starts at the center of the disc - the more the laser moves towards the outer end, the faster the burning speed gets. I have a 20x burner and 18x discs, and every burn starts at about 6-7x and then gets progressively faster, until the last 20secs of the burn it actually burns at 18x.

change ide cable 1st ok get back with me thx nick

CLICK ON THE LINK BELOW TO FIX THE ISSUE

http://www.windowsguru.org

Sounds like you have done all you possibly can, it may well be that the drive has finally given up and a replacement is neccasary. You can try to repair the autorun .inf file, but i think a replacement. http://www.microsoft.com/downloads/details.aspx?FamilyID=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en Sorry!