Sd400 Lence don't rertact. SD400

Hi you can download from here--
http://www.starbatteries.com/caposd5mpdie.html, open it and click on "Canon Powershot SD400 5MP Digital Elph Camera View the product manual [Download- PDF, "

thanks

First, make sure your camera can accept SDHC cards. If the camera says the card is locked, move the slide switch on the side of the card.

You should send the camera with the battery for service to find out if there is a defect on any internal circuit boards, or if the fault is actually the battery. There is no reliable way for you to determine this yourself, unless you have the proper setup and training to service these cameras.

Jerry G.

You mean SD400 camera doesn't show any error sign and it just doesn't have live view to shoot picture?
If yes, its problem of bad CCD imager and Canon will provide free of cost repair facility for SD400 camera.
Click Canon CCD Advisory for details.

The Canon PowerShot SD400 has no internal memory. All pictures are recorded on a memory card.

Hi, press the Display button 2 times to turn on the LCD display.
thank you

I read a part solution on your web site about my Canon sd400 failing to start. The message gave a few free words about a micro swith in the cover. I couldnt find it! I called Canon tech and they said there was jo such switch. I packed up the camera and sent it off for a fix and a free firmware update. Probably going to cost $80. But I think it was the right thing to do!!
Ian

In both the situations the problem is with the apperture control mechanism of the camera. 1). sometimes the flexible ribbion cable carrying signal to the lense assembly get worn out, replacing the same will resolve the problem. 2) in some cases the leaf blades of the apperture gets sticky, cleaning of the same solves the problem. 3). If you happen to drop the camera then the alignment of the motor moving the blades get disturbed.


In all the cases only a good repair man can fix the problem .

abserve the whether dist particle are jamed in lence groov becuase fine dust also problamatic for it

its very eas to fix this one..

just use a small screw driver and open it up..

its possible that the gears were just misaligned.

got mine fixed..