Nilfisk Supreme 250 won't power up? - Nilfisk Vacuums

It appears for have hidden spindles holding the wheels so would involve full disassembly. No one has documented this before

https://www.nilfisk.com/global/consumer/products/vacuum-cleaners/traditional/elite-energy-comfort-eu/c_107413385/

By the looks of it, you start with the 2 screws in the bag access bay and then keep going. This is a job that should be done by a service centre.

https://www.google.com/search?q=Nilfisk+Elite+Comfort+disassembly

The Parts Diagram shows all the relative parts and the wheels are held internally by one screw. Blow the PDF image up to 250%.

https://www.wap-nilfisk-alto-shop.de/media/pdf/83/5d/da/ET_Elite.pdf

..

google Nilfisk King 515 bags
there are several online.

I would say unlikely for a home fix. Getting into vacuums like that is always an issue, but this has the added issue that the cord is auto retractable. The is a small drum with a huge coil spring behind it! Depending where the dog chewed through, you could just wire on a new mains plug?

https://www.nilfisk.com/global/products/vacuum-cleaners/nilfisk-coupe-neo-power-eu/p_128350102/

..

What kind of vacuum is this? If it is a pushbutton switch you may need to replace the switch.

www.fixya.com/support/t10779019-pull_apart_nilfisk_action_plus_vacuum

Nov 6, 2011 - How to pull apart a nilfisk action plus vacuum cleaner. Rod Turner Jan 27, 2012.Remove the screw from the top rear of the upper case. Open the lid to the bag area remove the 2 screws at the rear of that area. Land Rover Aug 24, 2014. Fixed. Saved me buying a new vac for now. Nilfisk Action Plus Repair Manual
10 answers
Aug 3, 2013
How to take apart a Nilfisk Action Plus Vacuum to ...
11 answers
Mar 9, 2012
How to take nilfisk action plus apart
11 answers
Oct 21, 2011
How to take apart Nilfisk Action Plus to replace
11 answers
Feb 2, 2010
More results from www.fixya.com

Some information: http://www.nilfiskcfm.com/ProductLit/VT60.PDF

Accessories list: http://www.nilfiskcfm.com/ProductLit/VTACCE_1.PDF

Otheriwse to contact a local Nilfisk rep http://www.nilfiskcfm.com/FindARep.aspx

The fuse is part of the motor so is not something that can be changed. Make sure that there isn't a break in your power lead at the plug.