Error code e1 djo global heating pad - Heating & Cooling

https://www.google.com/search?q=Zamil+2+ton+inverter+split+type+E1+error+code

..

Typically, the E1 Error Code means that your boiler is running low on pressure, which is the cause of the boiler locking out and not working. When you see this code being displayed, all you have to do to fix it and get things back to normal is to repressurise your boiler.Aug 11, 2022

What does E1 mean on a boiler? E1 error code solutions

https://heatable.co.uk > boiler-advice > e1-boiler-fault-code
About featured snip

..

Joy, Re POST , make, model #, and complete question so we can answer your question effectively.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

if you want to buy it you can try to search in Amazon
Amazon com YELLWWORS 2 Pack 10ft Extra Long Denim braided Charging Cable...

F2-E1 - Touch Pad (Keypad) Cable Unplugged - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

HI. This code is a good indication of a separated key pad ribbon or the actual key pad may be damaged. Use the procedure below to isolate the culprit.

1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Hello,the lock latch is located directly in the center upper portion of the door. It is a hook shaped latch that lock by turning downward. This lock gets stuck in this position which causes the e1 f5 error code. Locate the latch through the vent holes in the upper front of the oven door. Insert flat headed screw driver into vent hole and gently push latch up to a horizontal position & simply open door. Once unlocked, push cancel on the control panel.This will clear the error code and resolve the issue.

Thanks

E1 F2 means bad connection between touch pad and control board. if connections are ok it may require parts. may get very expensive.