At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I WANT TO KNOW HOW TO ADJUST RECIEVE METER ON CX 33...
There are 2 adjustments for the S meter on a Connex cx-33. SV1 and SV2. The thing about setting that meter is you need to have an accurate RF generator the can ouput -93 dBm
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not sure what you mean, but there is always atmospheric noise. You use your squelch to adjust it to where the static you hear is just silenced. You will never not hear noise on AM or SSB. It is the nature of the mode. On FM its a different story.
If you're still getting loud squelch noise but do not receive on any channel, you must check the RF from the antenna to the audio stage(not included). There must be more than just one RF stage in this radio. Let me know what you find.
Error 1 means belt didn't start (or no speed sense).
Speed sensor and motor brushes are usually the culprit. Most of the time this its just the speed senor is out of place. Remove the hood and next to the pulley on the front roller you'll see a little black pill with wire attached. Adjust the tip of that to where its sitting within about an 1/8 inch from the magnet on the pulley. Speed sensor can go bad and you can tell by using a voltage meter on the audible continuity setting. New speed sensor: Cybex CX 445T Speed Sensor Part # AX 21500
If that doesn't work check your motor brushes, continuity on communication cables and calibrate it. If that doesn't work you may have a much larger problem such as a bad motor. How to test your motor
Wavetek
320B Multimeter Calibration procedure needed. Specifically what do the 6
internal calibritation pots specifically adjust. The circuit board has
these numbers: MD-HD110 & 33-5205F & 9917. The calib. pots have
these numbers: R06x, R031, R021, R23, R45. [email protected]
somebody has the same number as you. call customer service (611) if it does not work go to the place where u got the phone (att,metro pcs,sprint,t moble etc.
×