Samsung S830 digital camera sd card not formatting

Try formatting the sd card IN the camera. Never format an SD card while it is in the computer.

No you just need to format the card to FAT32 on the device you wish to use it on.Otherwise format on the computer,also check protection tab is off.

The i237 will work with any SD card up to 2GB in size or any SDHC card up to 32GB in size. It will not work with SDXC cards, 64GB or larger.

SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Yes format the memory card. Go into the camera's Menu and select Foemat memory card.

SDHC is an extension of the SD standard that extends the capacity from 2GB to 32GB. It's backward compatible in that devices designed for SDHC cards will also work with SD cards. It does not go the other way---that is, SDHC cards will not work in devices designed for SD cards.

I presume you mean a 2GB card, since a 2MB card might hold one picture.
The Digimax 4010 works with SD cards, not SDHC cards. You may use an SD card. Just make sure it is an SD card, 2GB and smaller. SDHC cards start at 4GB and go up to 32GB but, as stated earlier, will not work in the 4010.

First make sure that the SD card's lock switch is not in the lock position on the card. This camera allows for both SD and SDHC so as long as the card you are using isn't over 32GB then it hsould work. There is a version of SD called SDXC (Secure Digital Extended Capacity) and these are over 32GB and will not work in your camera. Lastly you may have to format the card in the camera before it will be recognized; this is usually requested by the camera upon inserting the memory card. So the main step would be to make sure the "Lock" mechanism on the SD memory card itself is not engaged. Hope this was helpful. Thanks for visiting FixYa.com

Just go into the menu and find "format"...follow the on-screen instructions.

emm... I have got an 2 gb SD memorycard for mine to and it wont work. Read on several places that the camera can only handle 1 gb memory card... Dont know if that's true thou.

The Kodak Z612 only accepts standard SD cards up to 2GB. As you rightly point ot the physical charactreristics are identical, its the internal format of the card that defines SDHC.

Standard SD cards use FAT - which has a 2GB limit.
SDHC cards use FAT32 - which has a limit of 32GB.

Stick with 2GB or smaller standard SD cards.