My sansui TV has sound but only shows images when room is completely dark,don't have remote to adjust brightness

Close the door or power down the tv in the other room to make adjustments to the main tv, I don't think there is a way to change the sensitivity of either screen you must shield your remote and its reflections from the other set I guess. have fun with that :)

There will be a control panel on the TV, usually on the side of the TV. You can use these buttons to enter the menu and adjust picture brightness. You can find an inexpensive universal remote easily.

It sounds as if the color controller/circuit board is becoming sensitive and may soon disconnect. Don't be surprised if someday soon, the picture goes very dark or vanishes completely. Have a technician check it out with his test equipment to locate the exact problem.

Hello
There is no details about the factory reset of your tV in its user manual. But intvidual reset for picture, sound etc can be selected and can be reset to factory reset.

Summary of picture settings

The following picture settings can be confi gured. Depending on the

format of the picture source, some picture settings are not available.

• [Auto Picture]: Sets all picture settings to the factory default.

• [Brightness]: Adjusts the intensity and details of dark areas.

• [Contrast]: Adjusts the intensity of bright areas, keeping dark areas

unchanged.

• [Color]: Adjusts color saturation.

• [Tint]: Adjusts the color balance in an image.

• [Sharpness]: Adjusts the level of sharpness in image details.

• [Color Temperature]: To set the color temperature to [Normal],
[Warm] or [Cool].

Summary of sound settings

The following sound settings can be confi gured. Depending on the

sound source, some sound settings are not available.

• [Auto Sound]: Sets all sound settings to the factory default.

• [Equalizer]: Adjusts individual sound frequencies.

• [Virtual Surround Sound]: This selects the modes for more spatial

or surround sound reproduction.

• [Auto Volume Leveling]: Reduces sudden changes in volume, for

example, during commercials or when switching channels. Select

[On] or [Off].

• [TV Speakers]: Select [On] or [Off], or output sound to an

EasyLink compliant device. When [Speakers EasyLink] is selected,

the TV speakers are disabled and TV sound outputs to the speakers

of the compatible EasyLink compliant device. Adjust the volume
using the unit's remote control.
OK.

Turn the brightness up slightly and turn the contrast on the highest setting. There may also be settings to control wether your projectin on a wall or on a screen. Make sure these settings are correct to your setup.

From what i can find, you need to adjust the convergence of the individual projectors. One person said you need to adjust them once a month for optimal conditions, but also said once a year will suffice. I have an extra blue image, and although i was able to clean i dont know how many years of grime off the lenses and the mirror, i lack a remote that will operate the menu. I only have one universal remote by RCA that will operate the channels and volume, but not the input (im using S video input) nor the menu functions. You may have to buy a Hitachi remote (1-800-Remotes wants $40 for it), but i will try to get a better universal one and will post back if i have success.

A.J.

Hi Angel,
Are you really sure , your set has video? How dark is it ? As if really nothing visible? Am, sure you can hear sounds. You can adjust the brightness + button to increase the brightness. But if nothing happens , you have problem with your TV set. The problem might be in the Video section. Please let an expert technician to check it. Please don't do it by yourself, it's risky.
Please send feedback whatever comes up. So we can help you further in the future.

Thanks,
Eriez

Adjustable Color Temp. The Adjustable Color Temperature feature lets you adjust the color balance on your TV, depending on the type of light in the room, such as direct sunlight or artificial lighting. On your remote control there should be a button that lets you change the picture mode, IE. Rich, Personnal, Cinema, Sport etc...

u need to adjust contrst settings

ig you see an image but its just too dark, try adjusting the settings of brightness and contrast including lighting on the room.