What does Apps Tuning mean? Also where is the reset button on the back of the tv please?

There won't be a direct button to Auto Tune. That would be too risky. What happens if you accidentally press it halfway through an important program.

The tuning and other set up functions are accessed via the TV menus. There's probably a button called something like Menu or Setup. Once you press that you'll see all the options. Use the navigation and OK/Select/Enter key and the Exit/Back key for navigation.

Somewhere in your TVs menus there will be a section for tuning. Within that there will be at least two options - Manual Tuning and Auto Tuning.

Hope this helps.

If you click on the TV button on your remote control. I believe that this puts the TV back into Digital mode.
You can also go to the Main set up menu to get into the various tuning options by pressing the MENU button on your remote. There are some devious little settings hidden away in there.
My TV was not showing that it had HDMI when I selected AV inputs...I eventually found that it was able to be restored through the MENU access.

Download the user manual to your tV from net, and refer it about how you can make a factory reset to this TV. Do it. It will make all things right.

Hello

Just reset the TV to factory settings and retune it using auto tuning fuction from the Menu option.

To reset it to factory settings, do the following:

Turn on the TV. While holding down "UP arrow" button on the remote control, press the POWER button on the TV. [The TV will turns itself OFF and then back ON again. Release the "Up Arrow button.

This operation will clear all your customized settings including Paremtial Lock settings.
in otherwords, this is the process to unlock the TV if it is locked.
Retune it by autotune fuction. All the lost stations will emerge again.
Ok.

Please go to tuning menu and select Auto Scan/ Auto Tuning to tune all available channels to store in tv memory.
Factory reset actually delete all data/ settings in memory chip and set tv as it was in-box.
Thanks.

first of all I would like you to press the blue sky button on the top of your remote. Now press you tv guide button. If this has sorted it Great if not read on!!

what I am going to talk you through now is resetting your remote:

TV
RED + SELECT (flashes twice)
999

now press the blue sky button at the top of your remote now try the tv guide button. this should work no problem now.

now to the small matter of tuning your remote back in to work your volume etc

please follow the steps below:

TV
RED + SELECT
TV
0056

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

The retuning process is as follows:

1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
2. Press the BLUE button to display the MAIN MENU.
3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
4. Press the RED button to start the auto tuning process for all available digital channels.
5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

First check Tv menu comes on screen?
Connect DVD Player at any a-v input and confirm picture on tv. This will confirm that tv has no problem except in tuning circuit.

Now check Antenna / cable hooked up in RF input of tv properly.
Perform Auto-Search / Auto-Tuning / Auto-channel on TV menu and tune all available channels.
Still blue screen? means TV Tuner looks bad.

The retuning process is as follows:

1. Press the [i+] button on the remote control to display the DIGITAL INFO menu.
2. Press the BLUE button to display the MAIN MENU.
3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
4. Press the RED button to start the auto tuning process for all available digital channels.
5. Wait for the process to complete.

If toy wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.