Cameras Logo

Related Topics:

Question about Canon Cameras

2 Answers

Canon 70-200 is ii at problem

Hi, I now have a 70-200is ii lens that has been in trouble recently. The problem is that in autofocus, the focus changes from distance to near distance, but this does not happen at close range and I have to turn the rim. It works for a short time but it breaks down again. What is the problem?

Posted by MOHAMMAD on

2 Answers

Tony Parsons

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 6,402 Answers

Try cleaning the contacts on the rear of the lens and on the camera body - a gentle rub with a lint-free cloth is sufficient for this.

Posted on Apr 11, 2022

Ad

ADMIN Andrew

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Canon Master
  • 57,110 Answers

Connection to body or battery voltage.

Posted on Apr 10, 2022

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Autofocus problem on canon 135mm f2

If it focuses OK on manual focus and won't focus on auto focus the problem may be down to a broken ribbon cable in the lens.
2helpful
2answers

The auto focus does not work properly with this lens on either my Nikon D5000 or D7000. I have tried all possible combinations of AF settings. Typicaly, when I use single point to focus, the subject I...

Hi, It wouldn't autofocus on the D5000 as the body doesn't have an auto focus motor in the body and since that lens is AF, not AF-S, it won't autofocus. It should autofocus on the D7000 though, how far away are you from the object you're trying to photograph?
0helpful
1answer

Hi there, I don't know if it's a problem or not (I can live with it :) ). I just got a Canon EF 50mm f1.8 II lens, and I really love it. But: When I'm using the eye-level viewfinder (and not...

You may just have the left auto focus points selected. You don't say which camera model you have. If on the back of your camera you can see a button with an icon showing 5 small white blocks in a plus sign in a white box press this to select the auto focus points. It should show the available auto focus points and then use the left/right (wheel) button to change the selection
2helpful
1answer

Auto focus not working could you tell me if it is the lens or the camera that is most likely to be broken.

hi there,

what kind of lens do you use? D40 only support AF-S type to run the autofocus properly

have you switched the focus selector on the lens to A/M mode?
if you have but the autofocus is still not working, i assume that the lens-motor has broken

thanks
0helpful
1answer

Hi- purchased the Extender EF 2X II; it seems fine with my fixed focus 300mm, but the auto-focus doesn't operate with my 70-200mm EF IS USM zoom, in any mode. Any suggestions? Thanks G

You haven't stated which body you have but the AF will not work with the extender if the effective lens aperture is too low (remember that a 2x extender doubles the focal length but halves the effective aperture).

Canon's own website states: "Autofocusing does not operate if the effective maximum aperture is greater than f/5.6 (greater than f/8 on the EOS 1V and EOS 3)."
0helpful
1answer

Autofocus Failure - stopped working

Replace the broken ribbon cable in the lens
1helpful
1answer

Autofocus on my Canon 28-135mm f/3.5-5.6 EF IS fails

Hello. First, check the contacts on the lens mount--you're looking for bent pins, oxidized(odd-colored) metal, damaged contact points, etc. The camera must communicate reliably with the internal circuitry of the lens unit. If there is any dirt, moisture, intermittent contact going on, the sensitive focusing electronics will be effectively blinded. If all is fine with the contacts, then the problem lies with the circuits in the lens that provide critical focusing data to the camera. Movement of certain parts causes electrical changes to occur at a calibrated rate--if the camera loses connection, it can't tell if the lens is actually adjusting. You'll have to send the lens in for repair--http://www.usa.canon.com/consumer/controller?act=SupportIndexAct. This address should get you started.--Hope I helped!---Rick
3helpful
1answer

Canon Extender EX 1.4x ii not autofocussing

The EOS 40D only use auto focus up to aperture 5.6. Only the 1-series use auto focus up to aperture 8. The adapter adds 1 stop to the lens aperture. Since the 100-400 is a 4.5-5.6, the aperture range with the extender mounted will be 6.3-8.
There is a work around though. Just place a thin strip of insulating tape over the three pins on the lefthand side (lens side of the extender). No damage will occur to the camera or teleconverter. 
c9a9700.jpg
Not finding what you are looking for?

37 views

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2418 Answers

David Shaub

Level 3 Expert

2994 Answers

shadow

Level 3 Expert

490 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...