Canon Pixma MP250, Download service tool.

Search the internet. Stand upside down, and search. yo'll get it easy for free!!!!

how to download cannon mp250 resetter 200b error

http://stepblogger.com/tutorial/error-code-list-for-canon-pixma-mp287-all-in-one-printer/

First Step : Set The Canon PIXMA MP287 To Service Mode. To do that, follow this step, it's so easy.

1. Turn off the printer without pulling the power cord.
2. Press and hold the RESUME button (Green button), keep holding it and then press the power button, do not let go yet.
3. Keep holding the power button, now release the RESUME button and then press theRESUME button for 5 times and quickly release the POWER button.
4. When the printer entered the Service Mode, all LED will stop blinking.

Second STEP : Reset Canon PIMA MP287 Using Resetter. Open the mp287.exe, and then follow this step.

1. Insert some A4 paper, the printer will print the result.
2. Look for "Clear Ink Counter" section, press the "Main" button and wait for the message "A function was finished" and then press "OK" button.
3. Press the "Platen" button located beside the "Main" button.
4. Look for "Print" section, press the "EEPROM' button, select "Rear Tray" and pres "OK" button.
5. The printer should printout the result. That's all, you may turn off your printer now. Sometime you need to press the POWER button several time in order to turn off the printer.

source:http://stepblogger.com/tutorial/tutorial-how-to-reset-canon-pixma-mp287-using-resetter-tool/

that an ink error

its mean absorber full..(i think)
Check this steps :
1: Unplug power and USB
2: Open door and hold power button.
3: Connect power.
4: Close door, then release power button
5: Connect USB and an press power to use.

1 Press the power button to turn off the printer.

2 Hold the "Stop/Reset" button while pushing the power button. While still holding down the power button, release the "Stop/Reset" button and then push it twice in a row.

3 Wait approximately 20 to 30 seconds until the LED shows 0.

4 Push the "Stop/Reset" button four times in a row.

5 Push the power button twice.

6 Turn off the printer by pushing the power button one more time. The printer is now reset. Next comes resetting the counter on the cartridge.

7 Unplug the power and the USB cables from the printer.

8 Open the cartridge door and hold down the power button.

9 Reconnect the power cables while still holding down the power button.

10 Close the cartridge door and release the power button. The ink cartridge is now reset.

Hi,
If my answer helps you, please give me a 4-thumbs up rating.

This error indicates a service problem with the printer. Sometimes recycling will fix, or the paper path may be jammed.

Here is an excerpt from the manual for this error code:
Turn off the machine, and unplug the power cord of the machine from the power supply.Plug the machine back in and turn the machine back on.If the problem is not resolved, contact the service center. Print this out and you can have a list of the error codes for reference. http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mp250#ServiceAndSupport

The Error P07 means your printer Ink absorber is full. See complete Error code Canon mp250/258 Printer

Solution: How to reset it you can get detail on the web too. here is the link How to reset Canon MP 250 Series includes Manual Reset and Permanent Reset with Tools

Hello
This error is wasted ink full reset the printer press reset button and hold then press on relase and press twice reset button is now in maintenance mode to reset wasted pad ink press 4 times the reset button then turn the printer button on/off
Hope it helps, good luck