At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
You are very welcome. Sorry for the delay, this text should be as a Comment to my help below, then I get a notification. The section here is for asking for further information and discussion on that subject. I just got the notification that you found my help 'Helpful', so thanks again :>DYou are very welcome. Sorry for the delay, this text should be as a Comment to my help below, then I get a notification. The section here is for asking for further information and discussion on that subject. I just got the notification that you found my help 'Helpful', so thanks again :>D
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Babylock Esante ESE1 and ESE2 hoops are not compatible with the Esante ESI1 or ESI2 hoops. The Babylock ESI1/2 used the same hoops as the Brother PC7000 and PC7500. The ESE1/2 use the hoops that are compatible with the Brother PC6500 and PE700 series embroidery machines.
I wish that I had better news for you. This site has hoops for sale for both the ESI1 and the ESE1: http://www.allbrands.com/categories/871 . If you need hoops for either machine, use the compatibility data on each machine type to help you find more vendors that may have the embroidery hoops.
one drop on the needle bar after every 8 hours of sewing, and anywhere metal rubs on metal. But this will only get you so far. the shafts will also need to be oiled and this should be done by a technician as it requires complete disassembly of the machine.
Check that the button used to snip your thread at the end of your seam is not stuck. Mine will sometimes stick and if I just touch it again it will again activate and the red start/stop button will work again.
Thank you so much for your help!
You are very welcome. Sorry for the delay, this text should be as a Comment to my help below, then I get a notification. The section here is for asking for further information and discussion on that subject. I just got the notification that you found my help 'Helpful', so thanks again :>D
×