Question about Silo Televison & Video

1 Answer

I got a Silo SL-32V1 at a yard sale turned on great picture but no sound.

Did reset where you unplug for 1 hour then hold power button down 1 minute plug in hold power button down 1 more minute didn't work. Not sure if not getting all menu board up because of remote. Tried to adjust equalizer and can only move to right higher wont move left lower. Is this a problem with board ? only 1 in it or is there anything else I could try? Any help would be greatly appreciated.

Posted by Phillip134 on

  • MariaGilbreath
    MariaGilbreath Dec 23, 2021

    [ JOIN US ] I get paid more than $60 to $70 per hour for working online. I heard about this job 3 months ago and after joining this I have earned easily $10k from this without having online working skills . Simply give it a shot on the accompanying site…
    Here is I started.……......>> http://Www.NETCASH1.Com

×

Ad

1 Answer

Larry

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Silo Master
  • 3,895 Answers

Make sure internal speakers are on, but other than that it's going to be a board issue

Posted on Dec 07, 2021

Testimonial: "Can't find a setting for that but will check again. Thanks for tour help."

  • 1 more comment 
  • Phillip134 Dec 07, 2021

    Can't find any setting to show if on internal or external speaker

  • Larry Dec 08, 2021

    Some lower end sets don't have settings for speakers and this may be one of those, I'm not familiar with this brand TV so my help is kind of limited, some brands have a separate section in the power supply for sound but most use the main supply, I'd test power supply voltages, I'd assume the TV has a legond for what is what

  • Phillip134 Dec 23, 2021

    No believe it or not there isn't a legend

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Casio keyboard lit up, no sound, no responses

Unplug for several minutes and try again.

If that doesn't work, look up the "factory reset" procedure for your particular model via google and follow that procedure. It usually involves holding certain buttons down before and during power up.
Jul 20, 2010 • Casio Music
2helpful
2answers

I cant get the message lamp life is ending off

Unplug your projector from the power source. Hold down the On/Standby button and the Menu buttons at the same time and plug the power back in as you are holding them down. This will reset the lamp hours used and should remove that message.
2helpful
2answers

Would like to unlock the used pc i bought at a yard sale. it's a gateway solo, with win 200pro

some laptops to get by the first main password when turned on, you can hold down Esc key before switching on and keep holding while it boots up.

If this is a bios password, you can remove a few screws to lift the keyboard from top, in there is a battery pack disconect it for 24 hours then replace and turn back on should work.
1helpful
1answer

I loose my picture but i still get sound

Just try to reset so picture will come again, some LCD TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.
1. Unplug the LCD TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the LCD TV power button for five seconds.
4. Plug the LCD TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the LCD TV is responding again.
6. Turn off the LCD TV and reconnect the devices.
7. Turn on the LCD TV.

Hope it may help you;

Regards;
VOTIT
29helpful
4answers

Every 10 minutes my Panasonic plasma 720p turns mute

the problem is it is locked in store mode. I had to call panasonic to fix it, this is what they had me do.
1 hold the volume down on the tv while holding the menu button on the controller.
2 after the screen changes to the check menu, hold the off switch on the tv untill it turns off.
3 unplug the tv for 30 sec.
4 plug it back in and turn on the set.
5 select home option
6 your done.
0helpful
1answer

SONY KV32-FQ70U BLINK ERROR

Try unplugging the TV for about 10 minutes and then tunung it on again. Try a factory

To reset the TV to factory settings
1
Turn the TV on.
2 Hold down on the remote control.
3 Press and release the POWER button on the TV front panel. The TV will turn itself off,
then back on.
4 Release .

I'm assuming step 2 means hold down the power button.
1helpful
1answer

Panasonic large screen Model # PT-61LCX65

Here is the proceedure to replace the lamp and reset the lamp hours.
Lamp Replacement Procedure:
1. Press the POWER button to turn off the power.
2. Wait for about 1 minute until the cooling fan stops.
Note:
The lamp cooling fan will continue to operate for about 1
minute after the power is turned off. Do not unplug the AC
Cord from the outlet until the fan has stopped. Avoid
interrupting the power by using circuit breakers or switchable
power strips.
3. After the cooling fan has stopped, unplug the AC Cord from
the outlet.
Note:
Please wait more than one hour before replacing the lamp.
[ Forced cooling function ]
If you need to replace the lamp more urgently:
- The Projection display has a forced cooling feature.
After the POWER button is turned OFF, and during the
first minute of the normal cooling fan operation, press
the VOLUME UP button on the unit and CH UP key on
the remote at the same time for more than 5 seconds.
The cooling fan operates for about 10 minutes. (LAMP
LED will flash 5 times every 5 second and POWER LED
will flash red for 10 minutes.)
4. Remove the Front Cover Unit from the latches.
5. Turn the Knob to the left.
6. Pull the Lamp Cover out.
7. Loosen the Screw on the Lamp. Then, pull the Lamp.
Note:
Because the Lamp may still be hot, use caution when
handling.
8. Install the new Lamp, and tighten the Screw.
9. Install the Lamp Cover, and turn the Knob to the right.
10. Install the Front Cover Unit.
Lamp Time Reset Procedure:
Be sure to reset the Lamp time to "0" after replacing the new
Lamp.
1. Plug in the AC Cord, and turn on the power by pressing the
POWER button.
2. Press and hold the VOLUME DOWN button on the unit and
the SPLIT key on the remote together for over 5 seconds
in power on condition.
When the reset is finished, the display will indicate that the lamp hrs have been reset to 0 and the LAMP LED goes out.
1helpful
1answer

Sharp a/c-#AF-S85FX

The e1 code is operated by a timer which stops the machine every 720 hours of run time. There are 2 procedures to reset this.

1) unplug the machine. Hold down the power button while plugging it back in and waiting for a beep of about 5 seconds duration. Release the power button. Unplug the machine again. Resume trying to use it as an air conditioner.

2) unplug the machine. Hold down the Mode button while plugging it back in and waiting for a 3 second beep. Release the mode button. The machine will start. turn it off by pressing the power button. Resume trying to use the air conditioner.

If these do not work, the "clean filter timer" is broken and will require you to replace some parts.

(Aren't you glad there is a computer is almost everything?)
9helpful
1answer

It turns off

The e1 code is a demand to clean the filter. It means the unit has been running for 720 hours. It does not mean anything is broken...unless it hasn't been running for 720 hours. That would mean the "clean the filter" timer is broken! There are 2 reset methods.

1) Unplug the machine. Hold down the power button while plugging it back in and wait until it beeps (for about 5 seconds). Let go of the power button. Unplug the machine again, then plug it in and try to use it as an air conditioner.

2) Unplug the machine. Hold down the Mode button while plugging it back in. Keep the mode button pressed until it beeps (for about 3 seconds). Let go of the mode button. The machine will start. Turn it off by pressing the power button. Resume trying to use it as an air conditioner.

If neither of these work, the "clean the filter" timer is broken and needs replacing.
0helpful
1answer

Router connection

Try to reset the router first. There's a reset button at the back of it, hold it down for 30 seconds then unplug the power for 30 seconds, power it on. Make sure your Modem is connected to the Internet port on the router and your PC is in port 1.
Not finding what you are looking for?
Televison & Video Logo

Related Topics:

54 views

Ask a Question

Usually answered in minutes!

Top Silo Televison & Video Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7084 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

43246 Answers

Tom Chichester

Level 3 Expert

62199 Answers

Are you a Silo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...