It is frozen and display shows Power On and then nothing at all. please any tips or ideas? Standby button on the receiver works fine after a pulled it out and tested it. Remote has new batteries, but no indications the the receiver receives a signal .....
Have you tested the power supply output voltages?
Testimonial: "Can you be more specifik? After removing the Power Board I have at CON501 1 - 5.15V 2 - Nothing 3 - Ground 4 - Ground 5 - Nothing"
Can you be more specifik?
After removing the Power Board I have at
CON501
1 - 5.15V
2 - Nothing
3 - Ground
4 - Ground
5 - Nothing
With the powerboard monted and everything connected
CON501
1 - 4.89V
2 - 4.89V
3 - Ground
4 - Ground
5 - 12,2V
CON502 = All good
CON503 = All good
CON504 = All good
×
649 views
Usually answered in minutes!
×