Both lights are blinking and will not print - Canon Pixma iP2600 Photo InkJet Printer

Try disconnecting the computer from the printer and shutting it down by removing the power cord and then also shut down the computer for a minute or so and then reboot it and check in "Printers" and see if it has anything waiting to be printed and if so clear out the queue. Flashing green light indicates that the printer is receiving data from the computer and/or printing so you shut it all down and cold reboot to clear out the computer confusion in both the computer and the printer.

If the bottom amber colored light is blinking, the imaging drum needs replaced.

If the yellow print cartridge light is blinking, then replace the print cartridge (yellow toner).

Please clean the printhead using the software installed in your PC . Try printing now.

red paper light is blinked as it is indication that plz insert paper in your printer, and ink light blinks because your printer is low on ink, kindly get your printer cartage refilled.

Blinking drop light on HP6122 signifies an ink cartridge is out of ink. There are two cartridges -- color (larger of two) and black (smaller of two). Blinking drop light only indicates either, but not which. HP6122 service software and print driver are available from HP website http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=83027&lc=en&cc=us&dlc=en&lang=en&cc=us. HP6122 service software has a printer maintenance utility which includes ink cartridge monitor. Use the maitenance service utility to determine which (or both) cartridge is out of ink. With cartridge replacement, printer should automatically print test page, then reset and be ready for printing from your computer. To clear printed documents from print que, open the HP6122 print que via control panel > printers > double-click on HP6122 driver to show que > select document tab > select cancel.

Theblack print cartridge is empty or missing. The black-print-cartridgelight is blinking, and then printer stops printing. An error 40208 iswritten to the event log. The printer cannot detect the print cartridgecorrectly. Action

1. Reinsert or replace the print cartridge.
2. If the print-cartridge light is still blinking but the Attention light is not on, turn the printer off, and then back on.
3. If the problem continues, contact HP Customer Care at http://www.hp.com/support/clj2550 or see the flyer that came in the printer box for other contact information.

clean the printheads and the ceramic part_ still blinks 5 times orange and not printing. can anyone help me

Here is the solution on Hp web site for Blinking light
Click Here

.......

Buttons and lights on the printer Two buttons and three lights are located on the front of an HP Deskjet printer.

• The lights tell when the printer is working or when it needs attention.
• The buttons help control the printer.

Buttons and lights Purpose POWER button and light Push the POWER button to turn the printer off and on. When lit, the light shows that the printer is turned on. RESUME button and light The light blinks when there is a problem with paper. When the problem is corrected, press the button. Print cartridge light The light blinks when there is a problem with a print cartridge. When the problem is corrected and the top cover is closed, the light will stop blinking. Troubleshooting blinking printer lights Blinking lights Reason

All lights are off. The printer is off (asleep).

Press the POWER button to turn the printer on.

The printer should turn on automatically when a print job is sent to it.

The POWER (top) light is on. The printer is idle.

The printer is ready to print a document.

The POWER (top) light is blinking. The printer is busy printing.

Allow enough time to print. When a document has many fonts or graphics or uses complex color such as a color photo, it takes longer to begin printing.

The PRINT CARTRIDGE (bottom) light is blinking. Possible causes:

• The front cover is open. Make sure the front cover is completely closed.
• The print cartridge is missing. Make sure the print cartridge has been installed correctly.
• The print cartridge is broken or incompatible. Lift the front cover, and wait for the print-cartridge cradle to slide out. Check the part numbers on the print cartridge:

Black: 51645A

Color: C1823D,

If the print cartridges are compatible and correctly installed, they may be defective. Try replacing the print cartridges.

If none of the above suggestions fix the problem, and, if the error message still occurs, it may be a hardware failure. Call the HP Customer Support Center.