Whirlpool wall oven stopped working

pull or turn off the ovens main fuse at the house power board

if beeping continues after power is restored to the oven

turn off the ovens power again

get the oven checked out by an electrician

check the heating element for opening or cracks

Could be the circuit board or the heating element.

Sorry but if he is an electrician he should know what to do! The new wall oven will have a sticker on it with the kilowatt rating. The kilowatt rating is used to calculate the current it will draw. This calculation is dependant on your voltage supply. Once this is worked out it will determine circuit size. If your electrician can't work this out you need to find a new electrician.

Looks like it's time to put your oven down and adopt a new one. (Taps plays softly)

Ouch...sounds like the control module is blown. Thats the electronic timer. I've known this happen on several occasions. Bad luck!

Contact an electrician and or the power company.
I believe you have lost the neutral/ground in your power service.

its only screwed in to back wall no???if screws rusted well then drill htem out.hidden bake elemnet??hidden under oven cavity??in that case right side wall of unit comes off( a few screws down back side of panel and it removes from the side.(shut power first this element is always live!!!!!!!

hi switch main power off at wall. hold middle clock button in and switch power back on at the wall. Display should show --:-- and oven should work.