Question about Samsung Televison & Video

Open Question

I have a samsung bn68 tv. what size screw do i need to mount it to a tv stand

Posted by Catherine Moore on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Replacement stand Samsung LN S4051D 40 in LCD Television

Contact the authorized service center for Samsung. Or the authorized dealer for Samsung. They can provide you the exact size screws. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. More than Nine and half Lakh viewers cannot be wrong. Disassambly procedure to many brand TVs are given in details. Check it out too. Pull up older posts.
0helpful
3answers

I have a samsung tv bn68-04027a-03 i am trying to mount the tv on brackets but i dont know the size of r what type screws to buy for the tv

this is not a proper model # for any samsung tv, if it's an LCD tv, the model would begin with LN or LNT, Plasma tv would start with PN and LED tv starts with UN. Can't inform you without the proper model number.
0helpful
1answer

Samsung Un55d6050 TV stand screws

lol go to eBay or shopjimmy.com or your hardware store
0helpful
2answers

How do you take the stand off a LN32B530 in order to wall mount it?

The manual for this model is located at

http://downloadcenter.samsung.com/content/UM/200903/20090331173532953/BN68-01883M-00L02-0219.pdf

From what the instructions say, there are 4 screws on the back of the tv, at the bottom.. These go through the tv and into the base. Remove them and it should come off.
0helpful
1answer

The Swivel Mount TV Stand I just purcahsed didn't come with TV mount screws. My TV is a 50" Panasonic Viera TC- P50U2, what size screws do I need

Hello,

There are different types of stands as well as the screws vary. It is by the exact type of stand we can provide a screw size.

Another solution is for you to try to reach the dealer that supplied the TV stand to you, so as to get the exact screws that came with the stand.

Take care and good luck
0helpful
1answer

There are no bolts to mount my Samsung Series 6 to my TV Stand

YES TAKE THE SMALL BOLTS WITH YOU AND GET LONGER ONES
0helpful
1answer

Need screw size for 26" niko tv stand. to mount the tv to the stand

man i looked and couldnt find a size but here is a number to a company who might can tell u, its called peerless mounts 1-800-473-3753 good luck
0helpful
1answer

Polaroid TV

You are correct. Polaroid does not make the screws available. You will have to obtain locally, per Polaroid.
Not finding what you are looking for?

Open Questions:

0answers

My samsung TV UN70NU6070FXZC can't turn on, the red light blink 2 times with dark screen and no sound, and this cycle repeated after about 20 seconds again and again. What issue is it and how to do?. My samsung TV UN70NU6070FXZC can't turn on, the red light blink 2 times with dark screen and no sound, and this cycle repeated after about 20 seconds again and again. The Tv reboot again and again. Have to unplug power cord to stop it. Samsung Main board BN94-14106C, Power supply board BN44-01016A 1. Disconnect main board from power supply board: plug power cord, backlight on, output=13v ch1=120v ch2=80v ok. 2. Connect power board to main board disconnecting two connectors to screen, it can be turned on/off normally. No T-con board is found, is it included in the main board or side board? a. TV Standby: red light on, sound off, backlight off. on power board output=12v ch1=ch2=0v, on main board SW=0.1v PW=12vx2, HAVDD=AVDD=VGH=VGHD=0v FB_TRDY_3=0v. b. TV On: red light off, sound on, backlight on, on power board: output=13v ch1=124v ch2=82v, on main board: SW=3.3v PW=13vx2, HAVDD=AVDD=VGH=0v FB_TRDY_3=0v VGHD=0.1v. It seems that video part of the main board is not working? 3. Only connect anyone of the two screen connectors to main board connecting to power board, it can be turned on/off normally. a. TV Standby: red light on, sound off, backlight off, dark screen. on power board output=12v ch1=ch2=0v, on main board SW=0.1v PW=12vx2, HAVDD=AVDD=VGH=VGHD=0v FB_TRDY_3=0v. b. TV On: red light off, sound on, backlight on, dark screen. on power board: output=13v ch1=124v ch2=82v, on main board: SW=3.3v PW=13vx2, HAVDD=AVDD=VGH=0v FB_TRDY_3=0v VGHD=0.1v. It seems that video part of the main board is not working too? Maybe both of left-screen and right-screen be faulty? It seems not to be possible. It is same if only disconnect anyone of the four screen connectorsillustration tv . 4. Connect both of the two screen connectors to main board connecting to power board, it can't be turned on/off normally. Dark screen, red light&sound&backlight blink 2 times for 2 seconds then all off. on power board output=13-12v ch1=115-105-0v ch2=77-70-0vbacklight: lightness-a little lightness-dark, on main board SW=3.3-0.1v PW=13-12vx2, HAVDD=about 6-0v AVDD=about 10v-0v VGH=about 14v-0v VGHD=about 11-0v FB_TRDY_3=3.3v-0v It seems that video part of the main board is working now?. And then after 20 seconds the cycle repeats again and again!! I had to unplug power cord to stop it. I replaced the main board and power board, nothing changed.

Televison & Video Logo

Related Topics:

17 views

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76698 Answers

Ekse

Level 3 Expert

13435 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...