JCB 430Zx plus is having problems of moving . In the steering display, it shows only E. Can you suggest methods to repair it?

I tried the DIY service and repair
manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.comAll the best

I recently tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master.
It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose the problem.
I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything
got it from www.reliable-store.com

I recently tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. It would'nt move forward or reverse, engine was good both solenoids for forward and reverse worked, but still couldn't diagnose
the problem.
I don't have much technical knowledge but I just followed it step-wise, and now it works perfect! covers wiring, codes, diagrams, torque specs, PCV, everything
got it from www.reliable-store.com

I tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids
for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

I tried the DIY service and repair
manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

I bought one of the JCB Tradesman Toughphones off e-bay and had the same issue.
I notice that newly created contacts work fine. The problem is with about 90% of the contacts that were on the sim card even if I moved them to phone memory. If I open each contact and resave it with a dot or something after the name it works fine and then displays the callers/texters name ok. It's a bit laborious to go through them all one by one but it's a once off chore

not reverse working

ive got the same bloody problem... the caller id wont show when someone rings me... how do i get this to work ?

Speak to JCB and ask them to fax over the parts breakdown for this block. It's aluminium, and we had a split in the block which a specialist welder repaired for us. It has to be a specialist otherwise the block will twist or distort and the many little rubber seals will not work properly afterwards. Worth getting a new seal kit from jcb, about £80 i think.