Kenwood dishwasher f5 error - Kenwood Dishwashers

It is a water Fill Error

https://www.google.com/search?q=kenwood+dishwasher+error+codes+f5

..

.

google westinghouse dishwasher wsf6608x error codes f5

F5 signals an error in the water supply line, which may mean that the tap is not open far enough or that there is an error in water pressure

Westinghouse Dishwasher F5 Error - Water Level Fault

Try this

https://howtomendit.com/answers.php?id=518532&d=fault-f9-kid60s18

Page 30. 'Divisor position error'.

https://currys-ssl.cdn.dixons.com/manuals/KENWOOD%20Full%20size%20Dishwasher%20-12%20Settings%20KID60S17%20Manual.pdf

And there is no help on it at all, no Service Manual. you need a service call.

https://www.google.com/search?q=kenwood+dishwasher+divisor+position+error

https://washererrorcodes.com/kenwood-dishwasher-error-codes/

Fault Code F5 or Five Flashes
Cause: Spray arms are blocked/clogged or otherwise malfunctioning.
Action: Spray arms are easily removed so take them out of the dishwasher and wash in the sink to clear out any gunk (using descaler should help shift any stubborn debris). Whilst doing this run the dishwasher on a short program without the spray arms to clear any further blockages.

If your IFB dishwasher is a Neptune DX model, Error code F5 according to the owners manual is "Inadequate water supply"

F5

Inadequate water supply • Make sure the water input tap is totally open and that there is no water cut.
• Close the water input tap, separate the water input hose from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact the service if the error resumes.

For the Kenwood dishwasher (the circuitry can be quite similar):
F5 according to the manual suggests you have an 'increase in temperature when element should be off" The possible cause : Faulty element, Faulty electronics controller or faulty temp sensor. In all cases they suggset you have your service repair person resolve...

Salve la mia lavastoviglie whirpool sesto senso mi segnala errore 05 e lampeggia ed emette un suono come posso risolvere questo problema?potete aiutarmi? Grazie e Saluti

At the end of the rails which the drawers slide in and out on should have some sort of pin that can be removed which would allow the drawers to slide all of the way out. Just be sure not to damage the pins/clips when removing so that they can be used again when putting the drawers back in.

well since you asked on the 5th July, and no reply, doesnt look like you may get one. I thought thats what this site was about??