SMEG S340GX oven's symbols have rubbed off, would appreciate a clear photo of the front panel

https://stoveconnection.com.au/shop/index.php/brand/smeg/sticker-sets.html/p063737285-1.html.html

I found the decal set for this oven and also the oven instructions to match each decal

hope this helps http://kitchen.manualsonline.com/manuals/mfg/smeg/fs64mf.html

Well, they don't sell stickers anymore but u could buy graffix art stickers numbers that are in different sizes and u could do it by urself!
When sticking those numbers, try to buy the CLEAR COAT paste spray, use by artist and architects, spray it on those stickers to have them laminated for life! Hope that helps u out!

can't hepl you with that one but turn ff power and open the control panel . inside should be a tec sheet that will tell you the answer.. mm

Here's a picture of the panel... BTW does anyone know the wiring / have a wiring diagram for the door switch as mine was swapped around by an oven guy just to get it running but now I have a new switch and can't remember how it all goes!!

I Have The Same Problem Have You Managed To Work Yours Out??

The oven symbols have rubbed off my electrolux oven. It's not even 3 years old. Please can you help?

OK I have just moved into an apartment with this model (SA 398 X/1) and was searching for a user guide (no luck yet).

Anyhow my apartment was owned by a bachelor and it looks as though he hardly used the oven so everything's still intact.

I'm in Australia and these numbers are in Celsius so I hope they work for you.

From top Right (starting at the 2 o'clock position) the four numbers going clockwise downwards are:

50
90
120
160

Then from the left side (starting at 7 o'clock position) going clockwise upwards:

200
230
250 - with dots arching above the 250

Hope this helps -

Jane

I have a Smeg Double Oven DO4SS-5 that I need to remove the control panel on
it. I've removed the 2 bottom screws but is still reluctant to come off. Help please