What does e2 error code indicate? - DeLonghi PACN130HPE Portable Air Conditioner 13,000 BTU, Dehumidifier/Heater

Never heard of the make 'Haam"? Perhaps you mean 'Haier'? Anyway, it might be a generic drain error

An E2 Error code indicates that the washer is still draining after 8 minutes. Check the following: Check that the drain hose is not more than 391 ?3" (100 cm) from the floor. Remove any clogs from the drain hose.

E2 - Error Code - Stacked Laundry Center - Product Help

AC
The E1 or E2 error code is an Auto-Stop Protection Error, indicating an issue detected by a sensor. This error code will require service. The E3 error code displays when an Abnormal Operation Protection Error has occurred, and activates to protect the unit from damage. This error code will require service.Dec 20, 2018
https://www.lg.com/us/support/help-library/e1-e2-or-e3-error-code-CT10000014-1340721215523

The error code E2 is indicating that the console is not receiving any information from the reed switch or optic sensor. This is because the treadmill belt is not turning. If the motor would run you would lose the E2 error.Oct 31, 2007

A E1-F1 or E1-F2 is a faulty touchpad.
FixYourBoard.com has replacements about for NLA ovens.

They come with a two year warranty.
Reach out to us at 512-355-1108 or [email protected]

Error Codes mean different things on different machine brands. It is an error message indicating your machine is malfunctioning. Usually your owner's manual will have a list of error codes in the Troubleshooting Section that describes the problem and suggested resolution. If not, then search the internet for your machine's:

Manufacturer + Model + error code E2

...

Whirlpool F3 faults relate to temperature problems in the oven. In the case of the error E2-F3, F3 is the general fault code and E2 is the specific error code. An E0-F3 error indicates that the oven's temperature sensor is open; E1-F3, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in "Cook" mode; and E3-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in the clean mode. Here is the probe to order.

The part comes with a 365 day, any part, any reason return policy.

Hi There,
The E2 error codes indicates there is an problem with one of the sensors.
Please contact our customer service department for information on repair.
1-800- 26- Danby

Thanks!